On Thu, 20 May 2004 19:20:25 -0400, Julian Thomas wrote:
>I took the plunge to set up a wireless capability (most of the house is on
>a wired network but I wanted to be able to use a thinkpad T23 untethered).
>I have a Dlink DWL700AP access point and the Cisco 342 pc card. Needless
>to say, it's all working smoothly under Win2k.
>
>eCS is a different story. It wouldn't work, so I installed the latest
>cardbus drivers from the eCS website. They work - at least I can use a pc
>card modem and a cf adapter and read the cf card. However, the wifi is
>still not working under eCS (yet).
>
>Situation is that I have a wired NIC in the machine - assigned to Lan0
>[since it was the first one there] using dhcp. I installed the cisco
>drivers from the file that I found on hobbes, and verified that the ssid
>matches that in the WAP (I'm not using any WEP for now; not concerned due
>to an extremely rural location - it's too far even for drive-by access).
>I get an amber activity light on the cisco, but no green status indicator.
>
>LANTRAN.LOG shows:
>
>FFST/2 is installed but is not started. LANMSGDD is loaded and
>operational.
>
>Netstat shows the adapter, as does PC Card director [what a kludgy
>interface!]
>
>TCPIP config won't allow me to set it to DHCP (that may be because I had
>LAN0 set to use DHCP).
>
>What should I try next?
>
>
>--
> Julian Thomas: jt@jt-mj.net http://jt-mj.net
The following frags from my vintage Toshiba Laptop using Warp 3 FP 40 on a Linksys
WAP54G for TCPIP and NetBios using static addressing.
Config.sys for PCMCIA
REM FOR PCMCIA CARDS
BASEDEV=PCMCIA.SYS
BASEDEV=IBM2TOS1.SYS /S0=2 /E
REM USE FOR HARD DRIVES
BASEDEV=PCM2ATA.ADD /S:1 /B
REM FOR FAX/MODEM
DEVICE=C:\OS2\BOOT\AUTODRV2.SYS C:\OS2\AUTODRV2.INI
REM FOR WINOS/2
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
My Lantran.log for netbios for TCPIP and NetBios
LT00073: FFST/2 is installed but is not started. LANTRAN.LOG is being created.
IBM OS/2 LANMSGDD [04/26/95] 2.01 is loaded and operational.
IBM OS/2 LAN Protocol Manager
IBM OS/2 NETBEUI 2.60.5
NETBEUI: Using a 32-bit data segment.
Installing NETWKSTA.200 Version 4.0. IBM LAN Redirector (Apr 17, 1995)
IBM OS/2 NETBIOS 4.0
Adapter 0 has 155 NCBs, 96 sessions, and 7 names available to NETBIOS
applications.
NETBIOS 4.0 is loaded and operational.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
Adapter 0 is using node address 0004AC25A51E. The Token-Ring format is
002035A4A578.
rem laptop01 - Toshiba Laptop
rem 192.168.1.10 Cisco AiroNet 340 wireless and
rem All devices on the same subnet.
route -fh
arp -f
ifconfig lo 127.0.0.1
ifconfig lan0 192.168.1.10 netmask 255.255.255.0 metric 1 mtu 1492
route add default 192.168.1.1 1
ipgate off
That is all I can think of at the moment, use these for clues on your setup and let us know
how it's going.
David
David
David Butkovich
CM Consultants, Inc.
Ocoee, Florida USA
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
Nazaj na seznam