os2-wireless_users@2rosenthals.com ?????????????? ????? #4958 ??????? ??????? ?????

???: "Julian Thomas" <os2-wireless_users@2rosenthals.com> ?? ????
?????????
???: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com>
??: [OS2Wireless] Cisco 340 not working
??: Thu, 20 May 2004 19:20:25 -0400
??: eCS-Technical@yahoogroups.com, os2-wireless_users@2rosenthals.com

I took the plunge to set up a wireless capability (most of the house is on
a wired network but I wanted to be able to use a thinkpad T23 untethered).
I have a Dlink DWL700AP access point and the Cisco 342 pc card.  Needless
to say, it's all working smoothly under Win2k.

eCS is a different story.  It wouldn't work, so I installed the latest
cardbus drivers from the eCS website.  They work - at least I can use a pc
card modem and a cf adapter and read the cf card.  However, the wifi is
still not working under eCS (yet).

Situation is that I have a wired NIC in the machine - assigned to Lan0
[since it was the first one there] using dhcp.  I installed the cisco
drivers from the file that I found on hobbes, and verified that the ssid
matches that in the WAP (I'm not using any WEP for now; not concerned due
to an extremely rural location - it's too far even for drive-by access).
I get an amber activity light on the cisco, but no green status indicator.

LANTRAN.LOG shows:

FFST/2 is installed but is not started.  LANMSGDD is loaded and
operational.

Netstat shows the adapter, as does PC Card director [what a kludgy
interface!]

TCPIP config won't allow me to set it to DHCP (that may be because I had
LAN0 set to use DHCP).

What should I try next?

 
--
 Julian Thomas:   jt@jt-mj.net    http://jt-mj.net
 In the beautiful Finger Lakes Wine Country of New York State!
 Boardmember of POSSI.org - Phoenix OS/2 Society, Inc  http://www.possi.org
 -- --
 Never insult an alligator until you've crossed the river.



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
???????: ????, ??????, ??????.
?????????
??? ????????