| Da: |
Andy Willis <os2-wireless_users@2rosenthals.com> |
Intestazioni complete
Messaggio non codificato |
| Mittente: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Oggetto: |
[OS2Wireless] good choice for wireless pcmcia card |
| Data: |
Fri, 30 Apr 2004 08:49:47 -0600 |
| A: |
os2-wireless_users@2rosenthals.com |
|
|---|
Well I have turned on MAC filtering now, have the SSID set to not broadcast, lowered the power to cut the range, allowing only 1 association on the AP, and as both the card and AP are cisco turned on all the proprietary stuff to limit compatibility somewhat to other devices. I booted to windoze prior to turning on my AP a couple of times and scanned for wireless devices and there weren't any that came up. I don't think where I am there is likely to be any problems but is there any other safeguards that I could put into place? From what you write, Lewis, I see you aren't using WEP at home, am I worrying to much about WEP?
Lewis, what firmware do you have? If I can get WEP I can connect at other locations.
Andy
Lewis G Rosenthal wrote:
I wonder if the WEP issue is firmware related. Mine seems to work consistently, though admittedly, I don't use WEP at home. It is also possible that certain AP / Wi-Fi card combinations don't play well together with WEP.
Of course, all of the WEP stuff becomes a non-issue for most of us if and when we finally get WPA driver support and ultimately 802.11i (ratified) driver support (and hardware support).
On 04/29/2004 04:32 am, Jonas Buys thus wrote :
Indeed Andy, everyone is expecting WEP to work with
the CISCO 350 driver, but in fact , most of the times,
it does not work (sometimes it does) strangely enough.
Anyway, I use the driver + mac filtering on my WAP.
I can really recommend you LinkSys WPC11 v4. Supported by the latest GenPRISM + encryption et
cetra.
Best regards, Jonas Buys.
<< www.os2warp.be >>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|