From: "Jeffrey Race" <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless List" <os2-wireless_users@2rosenthals.com>
Date: Thu, 11 Jun 2009 17:59:52 +0700
Priority: Normal
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Subject: wrt54
Message-ID: <auto-000002532811@2rosenthals.com>

First attempt to extend wireless to my step-father's house interrrupted
when our house hit by lightning and a lot of eqpt damaged.

Now I have bought a second WRT54GL but still retain OEM firmware.

I have set it to fixed IP .1.103 so it will not conflict with DHCP
devices on the existing home network.

PROBLEM: I can address the WRT54 when I plug my pc directly
into the LAN port on the WRT54, but not when I connect the WRT54
to my home network (based on a router at 192.168.1.1).   It just
doesn't reply when I ping it, and of course I cannot go in to reconfigure
it remotely.   I can't even ping it when I connect my pc directly to
its WAN port (using pc fixed ip address at .1.105).

What must I do to be able to access the device from its WAN port?

Tks for all help
jeffrey race


-- 
This email was Anti Virus checked by Astaro Security Gateway. http://www.astaro.com