Hi folks,
if you consider tools such as ShiftRun, you can "select and run" the
desired configuration during boot.
On 18.04.2003 15.10.57, Aron Eisenpress wrote in OS/2 Wireless Users List:
MPTS and wireless NIC:
>Hi folks,
>
>Just a little more detail on how I switch the protocol.ini files, which
>I think is a little simpler than having to maintain 2 config.sys's...
>
>I have both drivers in config.sys at the same time. That hasn't caused me
>any problems at all, so config.sys doesn't need to change. (The cards I'm
>using are a 10baseT 3Com 3CXE589DT and the IBM High Speed Wireless card.)
>
>I have static copies of the different protocol.ini files, each under
another
>name (for example, Protocol_3CXE589DT.ini and
>Protocol_IBM_High_Rate_Wireless.ini), and a simple .cmd file to for each
one
>to copy it over the current protocol.ini (for example,
Switch_to_3CXE589DT.CMD
>and so on). To make it really easy, I've created icons in System Setup in
>a folder I called Switch Net Configuration. These are called "Switch to
..."
>(the appropriate name) and each runs the .cmd file to copy over the file.
>It just takes a couple of clicks to change the setup... but of course it
sill
>does require a reboot.
>
>--Aron
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>To unsubscribe from this list, send a message to
>steward@2rosenthals.com with the command
>"unsubscribe os2-wireless_users" in the body
>(omit the quotes).
>
>For help with other commands, send a message
>to steward@2rosenthals.com with the command
>"help" in the body (omit the quotes).
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
zurück zur Liste