| From: |
"Carl Gehr" <os2-wireless_users@2rosenthals.com> |
|
| Sender: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Subject: |
OS/2 Wireless Users List: Belkin F5D6020 PC Card (solution for Mark I think) |
| Date: |
Mon, 21 Apr 2003 12:56:11 est5edt |
| To: |
"os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com> |
|
|---|
On Mon, 21 Apr 2003 03:19:48 est5edt, Jonas Buys wrote:
>If you dispose about an OS/2 PRISM2 driver, use that
>(just to try).
>These are the correct manufacturer and device IDs:
>the cards is equipped with Intersil firmware and
>PRISMII chip
>manu: 0x0156
>dev: 0x0002
>
>These are the regular setting of the chipset, which
>are used in the Belkin product. I don't know wheather
>Jens included a check in the LinkSys driver for the
>appropriate dev and manu IDs, but if that is the case,
>you should best get the PRISM2 driver.
>
>Kind regards,
>Jonas Buys
FWIW, I have a TPad w/the 802.11b integrated adapter. I just ran the
PCI reporter on my system and it was reported as:
>Vendor 1260h Intersil Americas Inc (Was: Harris Semiconductor)
>Device 3873h PRISM 2.5 802.11b 11Mbps Wireless Controller
Which is consistent with Craig Hart's PCI device table [used by the
program]:
>V 1260 Intersil Americas Inc (Was: Harris Semiconductor)
>D 3873 PRISM 2.5 802.11b 11Mbps Wireless Controller
I don't know if this helps or not.
Carl
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|