Nachricht #5096 aus Archiv der Liste os2-wireless_users@2rosenthals.com

zurück zur Liste

Von: "Carl Gehr" <os2-wireless_users@2rosenthals.com> Kopfzeilen anzeigen E-Mail Quelltext Sender: os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> Betreff: OS/2 Wireless Users List: Belkin F5D6020 PC Card (solution for Mark I think) Datum: Mon, 21 Apr 2003 12:56:11 est5edt An: "os2-wireless_users@2rosenthals.com" <os2-wireless_users@2rosenthals.com>

On Mon, 21 Apr 2003 03:19:48 est5edt, Jonas Buys wrote:

>If you dispose about an OS/2 PRISM2 driver, use that
>(just to try).
>These are the correct manufacturer and device IDs:
>the cards is equipped with Intersil firmware and
>PRISMII chip
>manu: 0x0156
>dev: 0x0002
>
>These are the regular setting of the chipset, which
>are used in the Belkin product.  I don't know wheather
>Jens included a check in the LinkSys driver for the
>appropriate dev and manu IDs, but if that is the case,
>you should best get the PRISM2 driver.
>
>Kind regards,
>Jonas Buys

FWIW, I have a TPad w/the 802.11b integrated adapter.  I just ran the
PCI reporter on my system and it was reported as:

>Vendor 1260h Intersil Americas Inc (Was: Harris Semiconductor)
>Device 3873h PRISM 2.5 802.11b 11Mbps Wireless Controller

Which is consistent with Craig Hart's PCI device table [used by the
program]:

>V       1260    Intersil Americas Inc (Was: Harris Semiconductor)
>D       3873    PRISM 2.5 802.11b 11Mbps Wireless Controller

I don't know if this helps or not.

Carl

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).

For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Abonnieren: Nachricht (Feed), Sammelnachricht (Digest), Index. Abmelden E-Mail an ListMaster