| Gönderen: |
Jonas Buys <os2-wireless_users@2rosenthals.com> |
Tam Ba?l?klar
Çözülmemi? ?leti |
| Gönderen: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Konu: |
OS/2 Wireless Users List: Belkin card |
| Tarih: |
Sun, 20 Apr 2003 14:51:09 est5edt |
| Alacak: |
os2-wireless_users@2rosenthals.com |
|
|---|
It should work, you just must change the device and
manufacturer ID. You just picked out a special
driver! This driver is not the standard PRISM driver.
Now, in MPTS you can EDIT the NIC and bellow, in the
list of editable setting, you can change device and
manufacturer ID. Use PCISCAN.EXE to get these
hexadecimal IDs. They will be reported to you in the
for 0xAAAA, where AAAA is a hex number. You must
enter the AAAA.
I will test the Belkin card soon for my OS/2
Compatible Hardware List (www.os2warp.be) and I have
good hopes.
Kind regards, Jonas Buys.
<< www.os2warp.be >>
--- Mark Abramowitz <marka@relaypoint.net> wrote:
> I just purchased a Belkin wireless notebook network
> card, and tried the
> beta Linksys driver. I was told it uses the same
> chip as the Linksys.
>
> >From lantran.log (after I changed the name of
> wpc.msg to wpc11.msg), was
> the entry below. It *was* seen by the PC card
> director.
>
> If the card works, I found it available at CompUSA
> on sale for $20 with
> mail-in rebate.
>
> **************
> WPC11_NIF: CardInsertion at socket 1
> WPC11_NIF: CardInsertion at socket 2
> WPC11_NIF: CSCall_Wait(GET_CONFIGURATIONINFO):
>
> rc=0
>
> usSocket=1
>
> usAttributes=0
>
> ucVcc=0
>
> ucVpp1=0
> ucVpp2=0
>
> ucIntType=1
>
> ucConfigBase=400
>
> ucStatus=0
>
> ucPin=0
>
> ucCopy=0
> ucOption=0
>
> ucPresent=1
>
> ucFirstDevType=D
>
> ucFuncCode=6
>
> ucSysInitMask=0
>
> usManufCode=149
> usManuInfo=C1AB
>
> ucCardValues=0
>
> ucAssignedIRQ=FF
>
> usIRQAttributes=0
>
> usBasePort1=0
>
> ucNumPort1=0
> ucAttributes1=0
>
> usBasePort2=0
>
> ucNumPort2=0
>
> ucAttributes2=0
>
> ucIOAddrLines=10
> WPC11_NIF: DetectCard can't find a supported Card.
> WPC11_NIF: CSCall_Wait(GET_CONFIGURATIONINFO):
>
> rc=0
>
> usSocket=2
>
> usAttributes=0
>
> ucVcc=0
>
> ucVpp1=0
> ucVpp2=0
>
> ucIntType=1
>
> ucConfigBase=800
>
> ucStatus=0
>
> ucPin=0
>
> ucCopy=0
> ucOption=0
>
> ucPresent=1
>
> ucFirstDevType=FF
>
> ucFuncCode=6
>
> ucSysInitMask=0
>
> usManufCode=1BF
> usManuInfo=3302
>
> ucCardValues=0
>
> ucAssignedIRQ=FF
>
> usIRQAttributes=0
>
> usBasePort1=0
>
> ucNumPort1=0
> ucAttributes1=0
>
> usBasePort2=0
>
> ucNumPort2=0
>
> ucAttributes2=0
>
> ucIOAddrLines=10
> WPC11_NIF: DetectCard can't find a supported Card.
> WPC11_NIF: APM registered.
> WPC11_NIF is loaded and operational.
> IBM OS/2 LAN Netbind
> WPC11_NIF: OpenAdapter called.
> WPC11_NIF: HRTXIDC_REGISTER: rc=0, ARFlags=611
> WPC11_NIF: SetPacketFilter called. Param1=3
> WPC11_NIF: SetPacketFilter rc=0
> WPC11_NIF: AddMulticastAddress called. Param2= 1 0
> 5E 0 0 1
> WPC11_NIF: AddMulticastAddress rc=0
>
>
> --
>
-----------------------------------------------------------
> "Mark Abramowitz"<marka@relaypoint.net>
>
-----------------------------------------------------------
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
> To unsubscribe from this list, send a message to
> steward@2rosenthals.com with the command
> "unsubscribe os2-wireless_users" in the body
> (omit the quotes).
>
> For help with other commands, send a message
> to steward@2rosenthals.com with the command
> "help" in the body (omit the quotes).
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|