Mailing List os2-wireless_users@2rosenthals.com Archived Message #5546

From:	"Stanley Sidlov" <os2-wireless_users@2rosenthals.com>	Full Headers Undecoded message
Sender:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>
Subject:	Re: [OS2Wireless] OT - network weirdness
Date:	Fri, 23 Nov 2007 23:21:39 -0500 (EST)
To:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

In ALL cases, the DNS server at the client level is the ROUTER's IP address, and should NOT be configured manually if DHCP is working properly. It is possible that to make OS/2 work correctly that it MAY possibly require a default route that defines the router's IP but DNS is not required unless you wish to override the DNS servers provided by your ISP or programmed in your router manually. Even in your case of a SMC connected to a AP from Dlink, anything connecting to the the DLINK should be pointing to the SMC's address (unless you have the Dlink set up as a DHCP server, too, which could cause problems). In the SMC router, you can setup different DNS servers from what your ISP is using, I prefer OpenDNS.Org which adds additional phishing and malicious website filters plus 'smart' browsing, where you can type Google and get a list of google's sites, instead of www.google.com or google.com; in addition it can make suggestions as to where you might want to go based on what you mistyped, and blocks 404-type messages with something sane returned instead. Changing to someone else's DNS server keeps you from having to wonder if there is something wrong with your ISP's DNS server - which happens from time to time. In my Linksys wireless router, I have two of OpenDNS's servers listed first, the third is blank, and the router's DHCP request to my ISP gets the first DNS server from my ISP and puts it in the third spot. ALL my clients point only to the ROUTER as the DNS server from the DHCP request. On Fri, 23 Nov 2007 15:31:51 -0500, Julian Thomas wrote: >2 XP machines in this house don't get nameservice through my router, and >one of them doesn't get nameservice even when an explicit nameserver is >set into the tcp/ip properties. > >The third (my brother's) is working OK using an explicit ns address but >otherwise using DHCP. This is on a wireless connection through a Dlink WAP >connected to the SMC (wired only) router. > >My T60 was getting no nameservice either wireless or wired. > >Here's the weird thing: Under eCS 2.0RC2 the T60 works wired or wireless. >This machine (no windows partition) has been working. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list <os2-wireless_users@2rosenthals.com>. To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com> To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com> To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com> Send administrative queries to <os2-wireless_users-request@2rosenthals.com> To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster