Many thanks for your kind offer to look at the attached files. I was not quite sure exactly which lines I should send and may have included a few more than necessary - I apologize.
As I said earlier, this is a new installation of eCS2.0rc3 on a T40. During installation the software recognized the Intel mini-card 2100, even if the 2100 is not an option in the long list of hardware choices offered. (The Intel 2200, however, is on that list.) Mark Dodel tells me that he had the same problem with his thinkpad and the Intel 2200 minicard; he had to edit protocol.ini to make it work, but I understand not enough of the technology to do that for the 2100. Any help you might be able to give would be much appreciated!
Regards,
Lothar
Lewis G Rosenthal wrote:
<snip> DEVICE=D:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=D:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=D:\IBMCOM\LANMSGDD.OS2 /I:D:\IBMCOM /S
Pièce jointe:
PROTOCOL.INI(567 octets) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
retour à la liste