After installing eCS2.0rc3 on my thinkpad T40 with a built-in PC minicard, Intel 2100, I tried in vain to connect to wireless networks. After installation, during boot I get a flashing message in green 'No valid hardware info in Protocol.ini for ("WRND32$ ")'. The icon on the eCenter is black and crossed out in red, when it should really be green and "alive". I am sure I clicked on wireless connection during installation and the system discovered the Intel 2100 mini-card. (Under Windows the wireless connections work with my T40 and mini-card.) Apparently, something did not load right - perhaps protocol.ini. I was told that a similar failure exist with rc3 and Intel 2200 in other thinkpads of the 40 series. What can I do to try for wireless connections? Any suggestion would be welcome.
Lothar
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
listeye geri dön