On Wed, 14 Nov 2007 21:13:48 -0500 (EST), Hakan wrote:
>I tried installing RC2 after disabling ACPI but keeping the other
>settings at their defaults. The installation now progressed until the
>system complains that I have a disk problem which it offered to fix.
>Not knowing what the problem is -- this is a multiboot laptop -- I
>chose not to proceed.
>
>Does anyone know if I would have gotten a chance to view the nature of
>the problem and to decide whether to proceed by "fixing" the problem?
I don't know if your system has the same BIOS setting I do, but check
the SATA settings. In my case, depending on the ACPI level, the SATA
may be REQUIRED to use 'Compatibility' setting. I know that the ACPI
that comes with RC2 [V3.01, dated 24-Aug-2007] by default MUST have
this setting. OTOH, I am using 3.03, dated 02-Oct-2007, and I can use
the SATA(AHCI) mode. 'Compatibility' also works with the more recent
ACPI levels, but it causes the stand-alone DFSee to have a problem.
Don't know if this is applicable to your situation, but it's worth a
look.
Carl
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
back to list