>I'm not using jjscdrom. Just whatever came with eCS 2.0 RC3 which appear
>to be the same as your Dani drivers. I will try with some Taiyo Yuden
>premium DVD-R discs I just bought, but I hate wasting those. Already
>wasted a few of the others testing this release.
I have the same version of DANIATAP.FLT but it is called DANIATAPI.FLT
on my machine. DId you rename yours? Or, more likely, perhaps it was
renamed when it was made part of RC3.
I have a slightly older version from Aug 8, 2007 but it also represents
itself as version 1.8.1 using BLDLEVEL.
I suggest trying this version of DANIS506.ADD, also using JJSCDROM and
finally the same flags I have been using.
Hakan
>Mark
>
>
>>
>> On Sat, 10 Nov 2007 15:23:00 -0500, madodel wrote:
>>
>>> Hakan wrote:
>>>> I am pleased to share that with the latest version of RSJ, version
>>>> 6.02, just released, I am able to burn the Staples DVD-R disks I
>>>> previously could not use. According to the information on the RSJ
>>>> website, they have fixed some bug(s) related to finishing DVDs.
>>>>
>>>> I had previously updated to JJSCDROM, Dani's latest driver and filter,
>>>> versions 1.8.something and 0.40 and were able to rid myself of the
>>>> duplicate drive letters that showed up previously. That problem,
>>>> however, I believe was due to the incorrect ordering of option flags
>>>> when the driver was launched.
>>>>
>>>> Relevant portions of my CONFIG.SYS:
>>>>
>>>> DEVICE=C:\JJSCDROM\JJSCDROM.DMD /V /W
>>>> BASEDEV=DANIS506.ADD /PCS
>>>> BASEDEV=DANIATAPI.FLT /EJ /A:1 /U:0
>>>> BASEDEV=LOCKCDR.FLT
>>>> DEVICE=C:\CDWFS\RSJSCSI.SYS
>>>> IFS=C:\CDWFS\CDWFS.IFS
>>>> RUN=C:\CDWFS\CDWFSD.EXE -p "C:/var/temp" -c80000 -b16384 -t2 -i3 -s0
>>> WIth RSJ 6.02 it copies files for a while (up to a little less then a GB)
>>> to my T42p's DVD burner, then I start getting a slew of the following popups:
>>>
>>>
>>> *** Error no 565 at 10.11.2007 08:47:43 **************************************
>>>
>>> Command: Read(2297872, 1)
>>> Sense key: Illegal Request
>>> Adl. sense key: Invalid block address
>>>
>>> Sense buffer:
>>> 00000000 70 00 05 00 00 00 00 00-00 00 00 00 21 00 00 00 p...........!...
>>> 00000010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
>>> 00000020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
>>>
>>>
>>> In my config.sys (this is on eCS 2.0 RC3):
>>>
>>> DEVICE=D:\OS2\BOOT\OS2CDROM.DMD /Q
>>> IFS=D:\PROGRAMS\RSJCD\CDWFS.IFS /S
>>> BASEDEV=DANIS506.ADD
>>> BASEDEV=DANIATAP.FLT
>>> REM obsolete: BASEDEV=LOCKCDR.FLT /Q /D
>>> BASEDEV=OS2DASD.DMD
>>> RUN=D:\PROGRAMS\RSJCD\CDWFSD.EXE -p "F:/temp" -c200000 -b20480 -t2 -i3 -s0
>>>
>>> This is with Memorex and Verbatim DVD-R media.
>>>
>>> I get no such errors using RSJ 5.06.
>>>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
retour à la liste