Mailing List os2-wireless_users@2rosenthals.com Archived Message #5619

From:	"Carl Gehr" <os2-wireless_users@2rosenthals.com>	Full Headers Undecoded message
Sender:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>
Subject:	Re: [OS2Wireless] T60 won't connect either way
Date:	Wed, 31 Oct 2007 20:54:22 -0400 (EDT)
To:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

On Wed, 31 Oct 2007 17:38:38 -0400, Julian Thomas wrote: >I have XWLAN 3.00 - the widget won't install, and the exe version has >everything useful grayed out. I'm sure this is because the wireless LAN >isn't working right:-( > >It's the wired LAN that won't work with DHCP; I have to force it to a >fixed IP address. I couldn't get the widget or the stand-alone to operate on my A30p. It also had everthing grayed out. But, I think that was because the adapter was not specifically supported by WLAN. So, I'm still using the WiFiMon. Initially, the problem I had on the T60 looked the same, because the radio would not turn on. Eventually, upgrading to ACPI 3.2 [now using 3.3] and the test GenMacs [now using 2.1] worked. It took both of these to get them working. I'm not sure what magic WLAN performs, but it manages to assign an IP when switching from WiFi to Wired. The only thing is, you have to get the Wireless to work first. There is one question that has not been asked... [Please don't take it as insulting, 'cause I didn't know at first either.] Do you have the switch underneath the left-front of the keyboard turned on? The switch is an easy way to kill the WiFi adapter if you are out in public and want to protect against sneak attacks, the switch turns the radio on/off. Possibly you said earlier and I missed it: Have you tried using the WiFi on Windoze just to be sure: a) The adapter is working. b) The switch is working. Another thing to watch during the boot up: Does the WiFi icon light under the screen flicker while the system is coming up? After the boot is complete, the light should be on. If it is off, that's the problem. Another question about what you see at boot time: Do you see the GenMac messages [in GREEN on the screen] confirm recognition of the adapters. - Two sets, one for each adapter. If the messages are red and/or the version of the drivers is not: "Release Version 2.1 built Oct 23 2007 09:21:13" then you do not have the 'latest' level. Other than this, I'm running short of ideas. Carl =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list <os2-wireless_users@2rosenthals.com>. To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com> To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com> To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com> Send administrative queries to <os2-wireless_users-request@2rosenthals.com> To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster