OT for WIFI but may prove useful to somebody I hope.
I am having a problem with a Zyxel ATA and a Zyxel router. Their support is
being very helpful and suggested that the next time I had the problem a network
trace would be helpful. So I started looking for a solution only to find there
is not one for OS/2. I did find some code on Hobbes but it is very old and
obviously suffering from software rot as it threw loads of errors when I tried
to compile it. :-)
I then recalled that my Solaris box almost certainly had snoop on it and that
proved to be the case so I ensured I could trace the two boxes.
This morning I once again gave some brain cells over to an OS/2 solution and
had a flash of lateral inspiration. VPC using virtual switch puts your NIC into
promiscuous mode. In that case would OS/2's normal iptrace work - and the
answer is YES it traces all packets on the network. You need to actually have a
virtual machine running but that's all.
There is one big proviso in all this of course. The tracing machine and
whatever it is tracing *must* be connected by a HUB not a SWITCH. (Switches act
a bit like routers - they know what is connected to which port. You can see the
difference with ping. Ping a box on hub connected machines and all the lights
blink. Do the same thing with a switch and only the two machines concerned
blink.)
back to list