X-Account-Key: account1
X-UIDL: 130773
X-Mozilla-Keys:                                                                                 
Return-Path: <os2-wireless_users-report@2rosenthals.com>
X-ListServer: CommuniGate Pro LIST 5.1.3
List-Unsubscribe: <mailto:os2-wireless_users-off@2rosenthals.com>
List-ID: <os2-wireless_users.2rosenthals.com>
List-Archive: <http://2rosenthals.com:8100/Lists/os2-wireless_users/List.html>
Precedence: list
Message-ID: <list-1425301@2rosenthals.com>
Reply-To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Sender: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
From: "Hakan" <os2-wireless_users@2rosenthals.com>
Date: Tue, 23 Oct 2007 15:25:57 -0400 (EDT)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
X-Original-Message-Id: <0MKpCa-1IkPOP3y5x-0004mg@mrelay.perfora.net>
Subject: Re: [OS2Wireless] USB 3G Modem

Thank you, will read.  BTW, is there a tool under Windows XP/Vista
where I can check what the card reports to that OS?

On Tue, 23 Oct 2007 10:38:20 -0400, Ed Durrant wrote:

>Hi Hakan - perhaps my article here:
>
>http://www.os2voice.org/VNL/past_issues/VNL0606H/feature_1.html
>
>will help ?
>
>Cheers/2
>
>Ed.
>
>Hakan wrote:
>> I have another opportunity to experiment with an external Huawei Turbo
>> 3G USB Modem model E220. Per a Linux page on the net, this modem should
>> be configured using the AT-command set and then accessed using ppp.  I
>> have, per Lewis' earlier instructions, installed the USB-serial driver
>> but there does not seem to be any minimally functional terminal-program
>> part of eCS 1.2R and I don't have time to visit Hobbes and download any
>> terminal program today, it will have to wait until tomorrow.
>>
>> In case there are any USB-experts in this forum, the USB Device Manager
>> identifies two devices plugged in: "SGS Thomson Microelectronics"
>> product 0x2016 and "4 Either Hand" product 0x1003.  The latter seems to
>> be the modem since it disappears when I unplug the USB cable.  Below I
>> have included the device report from the USB Device Manager for the USB
>> 3G modem.
>>
>> Comments from any knowledgeable persons are welcome before I visit
>> Hobbes to download a minimal terminal-program to explore further with. 
>> I can add that if I type 
>>
>> echo "ATE0V1^SYSCFG=14,2,40000000,1,2" > com1
>>
>> in a command window, the response is "the drive is not ready", trying
>> everything from com through com5 results in the same response while
>> com6 results in "the system cannot find the device specified," thus
>> there seems to be something on one of the COM-ports.  It is odd though,
>> that the report below talks about SCSI command set...
>>
>>
>> <<< Device Description >>>
>>  Type            : 01
>>  USB Rev         : 110
>>  Class           : Reserved (0)
>>  Subclass        : Reserved (0)
>>  Protocol        : Reserved (0)
>>   Device Information is defined at interface Level
>>  Max. packetsize : 40
>>  Vendor  ID      : 12D1
>>  Product ID      : 1003
>>  Device Release# : 0000
>>  Strings:
>>   Manufacturer Name : HUAWEI Technologies
>>   Product Name      : HUAWEI Mobile
>>   Serial number     : Not implemented
>>  Number of Configurations : 1
>>
>>  Configuration 0 :
>>   Lenght     : 85
>>   Name       : <NONE>
>>   Value      : 1
>>   Attributes : 0xA0
>>   Power      : 500 mA
>>   Interfaces : 3
>>
>>   Interface 0
>>    Alt Setting : 0
>>    Name        : Data Interface
>>    Class       : Vendor specific
>>    SubClass    : Vendor specific
>>    Protocol    : Vendor specific
>>    Endpoints   : 3
>>
>>    Endpoint 0:
>>     Address     : 81
>>     Attributes  : 03
>>     Packetsize  : 0010
>>     Interval    : 128
>>
>>    Endpoint 1:
>>     Address     : 82
>>     Attributes  : 02
>>     Packetsize  : 0040
>>     Interval    : 0
>>
>>    Endpoint 2:
>>     Address     : 02
>>     Attributes  : 02
>>     Packetsize  : 0040
>>     Interval    : 0
>>
>>   Interface 1
>>    Alt Setting : 0
>>    Name        : Data Interface
>>    Class       : Vendor specific
>>    SubClass    : Vendor specific
>>    Protocol    : Vendor specific
>>    Endpoints   : 2
>>
>>    Endpoint 0:
>>     Address     : 85
>>     Attributes  : 02
>>     Packetsize  : 0040
>>     Interval    : 0
>>
>>    Endpoint 1:
>>     Address     : 05
>>     Attributes  : 02
>>     Packetsize  : 0040
>>     Interval    : 0
>>
>>   Interface 2
>>    Alt Setting : 0
>>    Name        : <NONE>
>>    Class       : Storage Device
>>    SubClass    : SCSI transparent command set
>>    Protocol    : Bulk-Only Transport
>>    Endpoints   : 2
>>
>>    Endpoint 0:
>>     Address     : 83
>>     Attributes  : 02
>>     Packetsize  : 0040
>>     Interval    : 0
>>
>>    Endpoint 1:
>>     Address     : 04
>>     Attributes  : 02
>>     Packetsize  : 0040
>>     Interval    : 0
>>
>>
>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>> This message is sent to you because you are subscribed to
>>   the mailing list <os2-wireless_users@2rosenthals.com>.
>> To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>> To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
>> To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
>> Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
>> To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>> Web archives are publicly available at: http://lists.2rosenthals.com
>>
>> This list is hosted by Rosenthal & Rosenthal, LLC
>> P.O. Box 281, Deer Park, NY 11729-0281. Non-
>> electronic communications related to content
>> contained in these messages should be directed
>> to the above address. (CAN-SPAM Act of 2003)
>>
>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>>
>>
>>   
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>This message is sent to you because you are subscribed to
>  the mailing list <os2-wireless_users@2rosenthals.com>.
>To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
>To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
>Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
>To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>Web archives are publicly available at: http://lists.2rosenthals.com
>
>This list is hosted by Rosenthal & Rosenthal, LLC
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=