I have another opportunity to experiment with an external Huawei Turbo
3G USB Modem model E220. Per a Linux page on the net, this modem should
be configured using the AT-command set and then accessed using ppp. I
have, per Lewis' earlier instructions, installed the USB-serial driver
but there does not seem to be any minimally functional terminal-program
part of eCS 1.2R and I don't have time to visit Hobbes and download any
terminal program today, it will have to wait until tomorrow.
In case there are any USB-experts in this forum, the USB Device Manager
identifies two devices plugged in: "SGS Thomson Microelectronics"
product 0x2016 and "4 Either Hand" product 0x1003. The latter seems to
be the modem since it disappears when I unplug the USB cable. Below I
have included the device report from the USB Device Manager for the USB
3G modem.
Comments from any knowledgeable persons are welcome before I visit
Hobbes to download a minimal terminal-program to explore further with.
I can add that if I type
echo "ATE0V1^SYSCFG=14,2,40000000,1,2" > com1
in a command window, the response is "the drive is not ready", trying
everything from com through com5 results in the same response while
com6 results in "the system cannot find the device specified," thus
there seems to be something on one of the COM-ports. It is odd though,
that the report below talks about SCSI command set...
<<< Device Description >>>
Type : 01
USB Rev : 110
Class : Reserved (0)
Subclass : Reserved (0)
Protocol : Reserved (0)
Device Information is defined at interface Level
Max. packetsize : 40
Vendor ID : 12D1
Product ID : 1003
Device Release# : 0000
Strings:
Manufacturer Name : HUAWEI Technologies
Product Name : HUAWEI Mobile
Serial number : Not implemented
Number of Configurations : 1
Configuration 0 :
Lenght : 85
Name : <NONE>
Value : 1
Attributes : 0xA0
Power : 500 mA
Interfaces : 3
Interface 0
Alt Setting : 0
Name : Data Interface
Class : Vendor specific
SubClass : Vendor specific
Protocol : Vendor specific
Endpoints : 3
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
torna alla lista