Mailing List os2-wireless_users@2rosenthals.com Archived Message #5716

From: "Hakan" <os2-wireless_users@2rosenthals.com> Full Headers
Undecoded message
Sender: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>
Subject: Re: [OS2Wireless] ThinkPad DVD Writer Problem
Date: Fri, 05 Oct 2007 11:18:17 -0400 (EDT)
To: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

Mark,

In light of the success I have had writing DVDs with the Kodak DVD+R
brand (and failure using the Staples DVD-R brand), I'd like to hear
what type(s) of DVDs you have been successful with and which ones
possibly have been failures.

As you know, we have exactly the same burner and firmware although I am
running RSJ 6.0 under eCS 1.2MR and you, if I understood correctly, are
using RSJ 5.53 under eCS 2.0RC2.

On Sun, 30 Sep 2007 22:10:15 -0500, madodel wrote:

>altownsend wrote:
>> Sunday, September 30, 2007 - 05:59 PM
>>
>>
>> In <list-1397502@2rosenthals.com>, on 09/30/2007
>>    at 08:39 PM, "madodel" <os2-wireless_users@2rosenthals.com> said:
>>
>>
>>
>>> Lewis G Rosenthal wrote:
>>>> On 09/29/07 06:17 pm, madodel thus wrote :
>>>>> Lewis G Rosenthal wrote:
>>>>>> On 09/29/07 03:58 pm, Neil Waldhauer thus wrote :
>>>>>>> On Sat, 29 Sep 2007 14:47:41 -0400 (EDT), "Hakan"
>>>>>>> <os2-wireless_users@2rosenthals.com> wrote:
>>>>>>>
>>>>>>>  
>>>>>>>> Thank you Neil -- what make and model is your DVD-burner?
>>>>>>>>
>>>>>>>> On Sat, 29 Sep 2007 07:49:25 -0700, Neil Waldhauer wrote:
>>>>>>>>
>>>>>>>>  I have a Thinkpad T43 model
>>>>>>>>  
>>>>>>>>> 2687-D7U. I don't know if that's a 'p' model, but it has a 1400 x
>>>>>>>>> 1050 display
>>>>>>>>> and an IBM multi-burner.
>>>>>>>>>      
>>>>>>> It's P/N: 39T2507
>>>>>>>
>>>>>>>  
>>>>>> Neil, open up RSJ's CD Writer Control and go to the System tab. You
>>>>>> should have the hardware details listed there. Mine shows:
>>>>>>
>>>>>> MATSHITA "DVD-RAM UJ-842 " RB01 "MATSHITADVD-RAM UJ-842 " N/A cdatapi
>>>>>> disabled RAW-3 MATSHITADVD-RAM_UJ-842__R
>>>>>>
>>>>>> Sometimes the part number can be less than useful, as IBM (now
>>>>>> Lenovo) substitutes different manufacturer drives/models for the same
>>>>>> OEM number.
>>>>>>
>>>>>> BTW, if your T43 were a T43p, the "p" would be appended to the model
>>>>>> number visible on the panel under the LCD. There are subtle
>>>>>> differences between the 43 and the 43p (a 1.6GHz CPU was available in
>>>>>> the 43, but the slowest CPU in the 43p was a 1.86). Probably the most
>>>>>> striking difference was that *all* 43p's supposedly came with ATI
>>>>>> FireGL 3200 128MB video, whereas the 43'a came with either an Intel
>>>>>> 915GM northbridge with an Intel 900 graphics chip (shared system RAM)
>>>>>> or a 915PM northbridge and an ATI MobilityRadeon X300 chip (64MB
>>>>>> onboard RAM), and the 43p offered an available 1600x1200 LCD. There
>>>>>> were a few other minor differences, too (available 100GB HDD in the
>>>>>> 43p, for example).
>>>>>>
>>>>> Don't the p models also have bluetooth?  I was told that besides the
>>>>> high resolution display that was the main difference with my T42p
>>>>> versus a T42, but I have never used it so I have no idea if it works.
>>>>>
>>>> I'm not sure if BT was exclusive to the p model, Mark. I recently set up
>>>> an X61s (blowing Vista away in favor of XP - who would've ever though I
>>>> would be doing anything "in favor of" XP?) and was able to successfully
>>>> use the BT in it to talk to my Sony Ericsson P990i smart phone,
>>>> transferring files (works via FTP; when you open an image file on the
>>>> phone, it caches it down to the computer first), viewing media, and even
>>>> creating and deleting directories on the internal drive as well as the
>>>> memory stick. It was somewhat useful, in fact, and performed better than
>>>> via IR.
>>>>
>>>> Re: your query concerning burning, I did a quick install last night on
>>>> my nephew's eCS 1.2 workstation of RSJ 6.01 (Sony CD-RW). After a
>>>> reboot, it worked exactly as expected. I suspect your trouble may either
>>>> lie in the CONFIG.SYS entries about which it seems to be complaining or
>>>> possibly an incompatible firmware rev (incompatible version 6 of RSJ).
>>>> Perhaps you're loading the RSJSCSI driver as well as Dani? Check your
>>>> entries. Also, Al makes a very good point about LOCKCDR, which can also
>>>> create some issues when it conflicts with Dani.
>>>>
>>>> Cheers.
>>>>
>>
>>> Here if I REM LOCKCDR.FLT or RSJSCSI.SYS it no longer finds the burner.
>>> This is on eCS 2.0 RC1.  Perhaps it is the sorting of Config.sys during
>>> the  install, but all this works fine with 5.06.  Can you post all the
>>> sequence  of config.sys lines that effect RSJ?  Al just posted most but
>>> not the  DANIATAPI.FLT line.  Here I have:
>>
>>> DEVICE=H:\PROGRAMS\RSJCD\RSJSCSI.SYS /S
>>> IFS=H:\PROGRAMS\RSJCD\CDWFS.IFS
>>
>>
>>> BASEDEV=OS2ASPI.DMD /ALL
>>> DEVICE=H:\OS2\BOOT\ASPINKK.SYS /v  <- This is a replacement for ASPIROUT
>>> that is included with DVDDAO
>>> BASEDEV=DaniATAPI.FLT /RSJ
>>> BASEDEV=LOCKCDR.FLT -v
>>
>>
>>> RUN=H:\PROGRAMS\RSJCD\CDWFSD.EXE -p "F:/temp" -c200000 -b20480 -t2 -i3
>>> -s0
>>
>> BASEDEV=DaniATAPI.FLT /RSJ
>> BASEDEV=LOCKCDR.FLT -v
>>
>> These are fighting with each other, BASEDEV=LOCKCDR.FLT -v is not needed
>> when you have BASEDEV=DaniATAPI.FLT /RSJ
>>
>> I have BASEDEV=DaniATAPI.FLT /RSJ in my config.sys, but not with RSJ
>> lines.  If RSJ finds BASEDEV=DaniATAPI.FLT /RSJ   RSJ will not install
>> BASEDEV=LOCKCDR.FLT -v.
>>
>> With BASEDEV=LOCKCDR.FLT -v all drive letters are changed here System
>> becomes under RSJ
>> S              Z
>> T             Y
>> U             S
>>
>> With out BASEDEV=LOCKCDR.FLT -v S,T, & U remain
>>
>> Do this:
>> 1- I Put a CD with data on it in CD drive T:\
>> 2- Attach  as T:\ as Z:
>> 3- Read CD as T:\
>> 4- Read CD as Z:\
>>
>> Regards Al
>
>Without lockcdr.flt RSJ does not find my DVD burner.  And yes I have added
>it to cddrv.inf.
>
>With daniatapi.flt /RSJ I can have lockcdr.flt and still have my S: access
>to the CD/DVD without attaching it.  All this works fine with RSJ 5.06.
>But with any newer release I get the aforementioned error when trying to
>copy a DVD.
>
>Mark
>
>
>--
>
>  From the eComStation Desktop of: Mark Dodel
>
>  Warpstock 2007 - Toronto, Ontario, Canada: http://www.warpstock.org
>  Warpstock Europe - Valkenswaard close to Eindhoven, the Netherlands:
>http://www.warpstock.eu
>
>
>For a choice in the future of personal computing, Join VOICE -
>http://www.os2voice.org
>
>   "The liberty of a democracy is not safe if the people tolerate the
>growth of private power to a point where it becomes stronger than their
>democratic State itself.   That in it's essence, is Fascism - ownership of
>government by an individual, by a group or by any controlling private
>power." Franklin Delano Roosevelt, Message proposing the Monopoly
>Investigation, 1938
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>This message is sent to you because you are subscribed to
>  the mailing list <os2-wireless_users@2rosenthals.com>.
>To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
>To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
>Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
>To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>Web archives are publicly available at: http://lists.2rosenthals.com
>
>This list is hosted by Rosenthal & Rosenthal, LLC
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster