os2-wireless_users@2rosenthals.com Messaggio archiviato #5721

Da:	"Carl Gehr" <os2-wireless_users@2rosenthals.com>	Intestazioni complete Messaggio non codificato
Mittente:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>
Oggetto:	Re: [OS2Wireless] T60 - limited progress
Data:	Thu, 04 Oct 2007 16:26:24 -0400 (EDT)
A:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

On Thu, 04 Oct 2007 15:58:26 -0400, Julian Thomas wrote: >In <list-1401974@2rosenthals.com>, on 10/04/07 > at 12:18 AM, "Carl Gehr" <os2-wireless_users@2rosenthals.com> typed: >>Probably not a problem with the install. You probably just do not have: >>* The latest Dani drivers >>* Be sure you have enough devices specified. Since I have >> the Advanced Dock which has extra USB ports, I use the >> following in Config.Sys: >> BASEDEV=USBEHCD.SYS >> BASEDEV=USBUHCD.SYS >> BASEDEV=USBUHCD.SYS >> BASEDEV=USBUHCD.SYS >> BASEDEV=USBUHCD.SYS >> BASEDEV=USBD.SYS >> BASEDEV=USBHID.SYS >> BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:1 >> Pay special attention to the REMOVABLES and the number of >> USBUHCD.SYS statements. > >I have all those files, but specified REMOVABLES:6 FLOPPIES:0 and used the >/v option in hopes that it would help. Strange as it may seem, the difference between '8' and '6' just might make the difference. And, you do have FOUR of the USBUHCD.SYS statements... Right? My Dani driver is: DANIS506.ADD 73740 8-24-07 4:42p I think /V will only _show_ you what the driver(s) saw at boot time. BTW, be sure you do NOT have the USB drive inserted at boot time. Wait and insert it after the system has completed the startup. When you insert the USB, then the "Refresh Removable Media" task should pop up and tell you that "Drive-? is now available." [Where ? is the drive letter assigned.] > >I was able to install the latest genmac and get the builtin wireless >working, so far no luck on the other. There are some other system problems >at the moment; I don't know if genmac has screwed things up or not. > > >> Intel PRO/1000 PL Network Connection [8086:109A] >> Be sure to specify OPTIONS = "NATIVE" for PRO/1000 > >I ran a pci sniffer that pinpointed it as a 109A. Where do I specify the >OPTIONS? In: d:\IBMCOM\PROTOCOL.INI you should find an entry: [W8086X109A_nif] DriverName = WRND32$ VENDOR = 0x8086 DEVICE = 0x109A NDIS_SYS = "E1E5132.SYS" NDIS_INF = "E1E5132.INF" DEBUGLEVEL = "NO" OPTIONS = "NATIVE" I think it should look exactly like this. If not, possibly you need to configure with MPTS. Even though you did it before, after installing the latest GenMac, you may need to repeat it to get it changed from the GenMac 2.00 to the 'experimental' level shown above. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list <os2-wireless_users@2rosenthals.com>. To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com> To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com> To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com> Send administrative queries to <os2-wireless_users-request@2rosenthals.com> To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster