On Thu, 04 Oct 2007 15:58:26 -0400, Julian Thomas wrote:
>In <list-1401974@2rosenthals.com>, on 10/04/07
> at 12:18 AM, "Carl Gehr" <os2-wireless_users@2rosenthals.com> typed:
>>Probably not a problem with the install. You probably just do not have:
>>* The latest Dani drivers
>>* Be sure you have enough devices specified. Since I have
>> the Advanced Dock which has extra USB ports, I use the
>> following in Config.Sys:
>> BASEDEV=USBEHCD.SYS
>> BASEDEV=USBUHCD.SYS
>> BASEDEV=USBUHCD.SYS
>> BASEDEV=USBUHCD.SYS
>> BASEDEV=USBUHCD.SYS
>> BASEDEV=USBD.SYS
>> BASEDEV=USBHID.SYS
>> BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:1
>> Pay special attention to the REMOVABLES and the number of
>> USBUHCD.SYS statements.
>
>I have all those files, but specified REMOVABLES:6 FLOPPIES:0 and used the
>/v option in hopes that it would help.
Strange as it may seem, the difference between '8' and '6' just might
make the difference. And, you do have FOUR of the USBUHCD.SYS
statements... Right?
My Dani driver is:
DANIS506.ADD 73740 8-24-07 4:42p
I think /V will only _show_ you what the driver(s) saw at boot time.
BTW, be sure you do NOT have the USB drive inserted at boot time. Wait
and insert it after the system has completed the startup. When you
insert the USB, then the "Refresh Removable Media" task should pop up
and tell you that "Drive-? is now available." [Where ? is the drive
letter assigned.]
>
>I was able to install the latest genmac and get the builtin wireless
>working, so far no luck on the other. There are some other system problems
>at the moment; I don't know if genmac has screwed things up or not.
>
>
>> Intel PRO/1000 PL Network Connection [8086:109A]
>> Be sure to specify OPTIONS = "NATIVE" for PRO/1000
>
>I ran a pci sniffer that pinpointed it as a 109A. Where do I specify the
>OPTIONS?
In: d:\IBMCOM\PROTOCOL.INI
you should find an entry:
I think it should look exactly like this. If not, possibly you need to
configure with MPTS. Even though you did it before, after installing
the latest GenMac, you may need to repeat it to get it changed from the
GenMac 2.00 to the 'experimental' level shown above.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
listeye geri dön