I have a T60 - Core Duo, both processors enabled;
eCS 2.0 RC2; SeaMonkey 1.1.3; PMMail/2; RSJ 6.01;
and a few other misc. packages.
Generally, everything is working OK, except as indicatd below.
See specific inserted comments below.
I have a few issues with ACPI 3.2, but the developers are [I believe]
working on understanding the problems and trying to create fixes. I
have not tried 3.3 yet. On the To-Do list.
SOUND - NONE at this point.
Good news: You MUST have the Integrated WinModem ENABLED
in the BIOS to get any sound at all.
Bad news: Do NOT enable System Sounds. Boot will not complete.
Do NOT try to play more than ONE sound. The second
attempt will lock the system tighter than a drum!
Again, UniAud developers are aware of the problem.
I expect a fix at some point, but no date known.
Carl
On Wed, 03 Oct 2007 20:39:17 -0400, Julian Thomas wrote:
>1. I finally thought to dig out the old Cisco PCCARD and move the drivers
>over from the T23 to the T60.
Ditch the Cisco! Use the builtin adapters. [See below.]
>
>2. I installed XWLAN 300. Couldn't add the widget to the toolbar - add
>widget had it grayed out:-(
XWLAN 3.00 works fine here with the GenMac 2.1 'experimental' drivers.
You must have a driver that recognizes the adapter before WLAN will
allow you to set up the Widget.
>
>3. Reinstalled it as an exe and got wireless going to the machine; made
>moving files over much easier, since I could now FTP rather than resort to
>thumbnet (with the intermediate stage of booting to cmd line from the eCS
>2 rc2 CD).
>
>There's still something wrong in the ecs RC2 installation that keeps it
>from seeing the thumbdrive (even though it is available from the cmd line
>from the install CD).
Probably not a problem with the install. You probably just do not
have:
* The latest Dani drivers
* Be sure you have enough devices specified. Since I have
the Advanced Dock which has extra USB ports, I use the
following in Config.Sys:
BASEDEV=USBEHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBD.SYS
BASEDEV=USBHID.SYS
BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:1
Pay special attention to the REMOVABLES and the number of
USBUHCD.SYS statements.
>
>ALso, I installed (warpin) the fat32 IFS, but on bootup it fails to find
>the D: partition which was created by XP as Fat32.
Sorry, I don't use FAT32. but, I'll be waiting to hear if you have any
problems with it.
>
>SO - I have wireless going with the Cisco card, but still neither of the
>builtin adapters (Intel Pro 1000 or Intel ABG 3945 [or whatever it is;
>listed as supported under GENMAC).
I have:
Driver level:
"Experimental Version 2.1 built Jun 28 2007 13:08:10"
Adapters:
Intel PRO/Wireless 3945ABG Network Connection [8086:4227]
Intel PRO/1000 PL Network Connection [8086:109A]
Be sure to specify OPTIONS = "NATIVE" for PRO/1000
>
>Right now, the next orders of business, after I get more necessary
>programs moved over, is:
>
>- Fix USB so that I can see the thumb drives
>
>- FIX Fat32 so that I can see the D drive, so that I can interchange with
>the XP environment
>
>- Try the latest genmac to see if it will help with either of the built-in
>adapters.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
retour à la liste