** Reply to message from "Julian Thomas" <os2-wireless_users@2rosenthals.com>
on Mon, 01 Oct 2007 21:47:54 -0400
> The doc for the bridge should tell you what the default IP address is. If
> you push reset (even better to do that, power off, and repeat), you should
> be able to get into the config screens using the default IP address and
> reconfig the device.
The older Linksys I have here says that pushing the reset button and holding it
for at least 10 seconds will reset it to factory defaults. Pressing and
releasing the button just resets it with the last values it had set up.
Try holding the reset button, release it, then cycle [ower if the other way
doesn't work.
--
Will Honea <whonea@whonea.net>
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
terug naar list