X-Account-Key: account1 X-UIDL: 125086 X-Mozilla-Keys: Return-Path: X-ListServer: CommuniGate Pro LIST 5.1.3 List-Unsubscribe: List-ID: List-Archive: Precedence: list Message-ID: Reply-To: "OS/2 Wireless Users Mailing List" Sender: "OS/2 Wireless Users Mailing List" To: "OS/2 Wireless Users Mailing List" X-Original-Message-ID: <47006517.3070307@ptdprolog.net> Date: Sun, 30 Sep 2007 22:10:15 -0500 From: "madodel" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: Re: [OS2Wireless] ThinkPad DVD Writer Problem altownsend wrote: > Sunday, September 30, 2007 - 05:59 PM > > > In , on 09/30/2007 > at 08:39 PM, "madodel" said: > > > >> Lewis G Rosenthal wrote: >>> On 09/29/07 06:17 pm, madodel thus wrote : >>>> Lewis G Rosenthal wrote: >>>>> On 09/29/07 03:58 pm, Neil Waldhauer thus wrote : >>>>>> On Sat, 29 Sep 2007 14:47:41 -0400 (EDT), "Hakan" >>>>>> wrote: >>>>>> >>>>>> >>>>>>> Thank you Neil -- what make and model is your DVD-burner? >>>>>>> >>>>>>> On Sat, 29 Sep 2007 07:49:25 -0700, Neil Waldhauer wrote: >>>>>>> >>>>>>> I have a Thinkpad T43 model >>>>>>> >>>>>>>> 2687-D7U. I don't know if that's a 'p' model, but it has a 1400 x >>>>>>>> 1050 display >>>>>>>> and an IBM multi-burner. >>>>>>>> >>>>>> It's P/N: 39T2507 >>>>>> >>>>>> >>>>> Neil, open up RSJ's CD Writer Control and go to the System tab. You >>>>> should have the hardware details listed there. Mine shows: >>>>> >>>>> MATSHITA "DVD-RAM UJ-842 " RB01 "MATSHITADVD-RAM UJ-842 " N/A cdatapi >>>>> disabled RAW-3 MATSHITADVD-RAM_UJ-842__R >>>>> >>>>> Sometimes the part number can be less than useful, as IBM (now >>>>> Lenovo) substitutes different manufacturer drives/models for the same >>>>> OEM number. >>>>> >>>>> BTW, if your T43 were a T43p, the "p" would be appended to the model >>>>> number visible on the panel under the LCD. There are subtle >>>>> differences between the 43 and the 43p (a 1.6GHz CPU was available in >>>>> the 43, but the slowest CPU in the 43p was a 1.86). Probably the most >>>>> striking difference was that *all* 43p's supposedly came with ATI >>>>> FireGL 3200 128MB video, whereas the 43'a came with either an Intel >>>>> 915GM northbridge with an Intel 900 graphics chip (shared system RAM) >>>>> or a 915PM northbridge and an ATI MobilityRadeon X300 chip (64MB >>>>> onboard RAM), and the 43p offered an available 1600x1200 LCD. There >>>>> were a few other minor differences, too (available 100GB HDD in the >>>>> 43p, for example). >>>>> >>>> Don't the p models also have bluetooth? I was told that besides the >>>> high resolution display that was the main difference with my T42p >>>> versus a T42, but I have never used it so I have no idea if it works. >>>> >>> I'm not sure if BT was exclusive to the p model, Mark. I recently set up >>> an X61s (blowing Vista away in favor of XP - who would've ever though I >>> would be doing anything "in favor of" XP?) and was able to successfully >>> use the BT in it to talk to my Sony Ericsson P990i smart phone, >>> transferring files (works via FTP; when you open an image file on the >>> phone, it caches it down to the computer first), viewing media, and even >>> creating and deleting directories on the internal drive as well as the >>> memory stick. It was somewhat useful, in fact, and performed better than >>> via IR. >>> >>> Re: your query concerning burning, I did a quick install last night on >>> my nephew's eCS 1.2 workstation of RSJ 6.01 (Sony CD-RW). After a >>> reboot, it worked exactly as expected. I suspect your trouble may either >>> lie in the CONFIG.SYS entries about which it seems to be complaining or >>> possibly an incompatible firmware rev (incompatible version 6 of RSJ). >>> Perhaps you're loading the RSJSCSI driver as well as Dani? Check your >>> entries. Also, Al makes a very good point about LOCKCDR, which can also >>> create some issues when it conflicts with Dani. >>> >>> Cheers. >>> > >> Here if I REM LOCKCDR.FLT or RSJSCSI.SYS it no longer finds the burner. >> This is on eCS 2.0 RC1. Perhaps it is the sorting of Config.sys during >> the install, but all this works fine with 5.06. Can you post all the >> sequence of config.sys lines that effect RSJ? Al just posted most but >> not the DANIATAPI.FLT line. Here I have: > >> DEVICE=H:\PROGRAMS\RSJCD\RSJSCSI.SYS /S >> IFS=H:\PROGRAMS\RSJCD\CDWFS.IFS > > >> BASEDEV=OS2ASPI.DMD /ALL >> DEVICE=H:\OS2\BOOT\ASPINKK.SYS /v <- This is a replacement for ASPIROUT >> that is included with DVDDAO >> BASEDEV=DaniATAPI.FLT /RSJ >> BASEDEV=LOCKCDR.FLT -v > > >> RUN=H:\PROGRAMS\RSJCD\CDWFSD.EXE -p "F:/temp" -c200000 -b20480 -t2 -i3 >> -s0 > > BASEDEV=DaniATAPI.FLT /RSJ > BASEDEV=LOCKCDR.FLT -v > > These are fighting with each other, BASEDEV=LOCKCDR.FLT -v is not needed > when you have BASEDEV=DaniATAPI.FLT /RSJ > > I have BASEDEV=DaniATAPI.FLT /RSJ in my config.sys, but not with RSJ > lines. If RSJ finds BASEDEV=DaniATAPI.FLT /RSJ RSJ will not install > BASEDEV=LOCKCDR.FLT -v. > > With BASEDEV=LOCKCDR.FLT -v all drive letters are changed here System > becomes under RSJ > S Z > T Y > U S > > With out BASEDEV=LOCKCDR.FLT -v S,T, & U remain > > Do this: > 1- I Put a CD with data on it in CD drive T:\ > 2- Attach as T:\ as Z: > 3- Read CD as T:\ > 4- Read CD as Z:\ > > Regards Al Without lockcdr.flt RSJ does not find my DVD burner. And yes I have added it to cddrv.inf. With daniatapi.flt /RSJ I can have lockcdr.flt and still have my S: access to the CD/DVD without attaching it. All this works fine with RSJ 5.06. But with any newer release I get the aforementioned error when trying to copy a DVD. Mark -- From the eComStation Desktop of: Mark Dodel Warpstock 2007 - Toronto, Ontario, Canada: http://www.warpstock.org Warpstock Europe - Valkenswaard close to Eindhoven, the Netherlands: http://www.warpstock.eu For a choice in the future of personal computing, Join VOICE - http://www.os2voice.org "The liberty of a democracy is not safe if the people tolerate the growth of private power to a point where it becomes stronger than their democratic State itself. That in it's essence, is Fascism - ownership of government by an individual, by a group or by any controlling private power." Franklin Delano Roosevelt, Message proposing the Monopoly Investigation, 1938 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to To switch to the INDEX mode, E-mail to Send administrative queries to To subscribe (new addresses), E-mail to: and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=