X-Account-Key: account1 X-UIDL: 125073 X-Mozilla-Keys: Return-Path: X-ListServer: CommuniGate Pro LIST 5.1.3 List-Unsubscribe: List-ID: List-Archive: Precedence: list Message-ID: Reply-To: "OS/2 Wireless Users Mailing List" Sender: "OS/2 Wireless Users Mailing List" To: "OS/2 Wireless Users Mailing List" From: "altownsend" Date: Sun, 30 Sep 2007 17:59:53 -0600 X-Original-Message-ID: <1191201125_114710@mx.dccnet.com> Subject: Re: [OS2Wireless] ThinkPad DVD Writer Problem Sunday, September 30, 2007 - 05:59 PM In , on 09/30/2007 at 08:39 PM, "madodel" said: >Lewis G Rosenthal wrote: >> On 09/29/07 06:17 pm, madodel thus wrote : >>> Lewis G Rosenthal wrote: >>>> On 09/29/07 03:58 pm, Neil Waldhauer thus wrote : >>>>> On Sat, 29 Sep 2007 14:47:41 -0400 (EDT), "Hakan" >>>>> wrote: >>>>> >>>>> >>>>>> Thank you Neil -- what make and model is your DVD-burner? >>>>>> >>>>>> On Sat, 29 Sep 2007 07:49:25 -0700, Neil Waldhauer wrote: >>>>>> >>>>>> I have a Thinkpad T43 model >>>>>> >>>>>>> 2687-D7U. I don't know if that's a 'p' model, but it has a 1400 x >>>>>>> 1050 display >>>>>>> and an IBM multi-burner. >>>>>>> >>>>> >>>>> It's P/N: 39T2507 >>>>> >>>>> >>>> Neil, open up RSJ's CD Writer Control and go to the System tab. You >>>> should have the hardware details listed there. Mine shows: >>>> >>>> MATSHITA "DVD-RAM UJ-842 " RB01 "MATSHITADVD-RAM UJ-842 " N/A cdatapi >>>> disabled RAW-3 MATSHITADVD-RAM_UJ-842__R >>>> >>>> Sometimes the part number can be less than useful, as IBM (now >>>> Lenovo) substitutes different manufacturer drives/models for the same >>>> OEM number. >>>> >>>> BTW, if your T43 were a T43p, the "p" would be appended to the model >>>> number visible on the panel under the LCD. There are subtle >>>> differences between the 43 and the 43p (a 1.6GHz CPU was available in >>>> the 43, but the slowest CPU in the 43p was a 1.86). Probably the most >>>> striking difference was that *all* 43p's supposedly came with ATI >>>> FireGL 3200 128MB video, whereas the 43'a came with either an Intel >>>> 915GM northbridge with an Intel 900 graphics chip (shared system RAM) >>>> or a 915PM northbridge and an ATI MobilityRadeon X300 chip (64MB >>>> onboard RAM), and the 43p offered an available 1600x1200 LCD. There >>>> were a few other minor differences, too (available 100GB HDD in the >>>> 43p, for example). >>>> >>> >>> Don't the p models also have bluetooth? I was told that besides the >>> high resolution display that was the main difference with my T42p >>> versus a T42, but I have never used it so I have no idea if it works. >>> >> I'm not sure if BT was exclusive to the p model, Mark. I recently set up >> an X61s (blowing Vista away in favor of XP - who would've ever though I >> would be doing anything "in favor of" XP?) and was able to successfully >> use the BT in it to talk to my Sony Ericsson P990i smart phone, >> transferring files (works via FTP; when you open an image file on the >> phone, it caches it down to the computer first), viewing media, and even >> creating and deleting directories on the internal drive as well as the >> memory stick. It was somewhat useful, in fact, and performed better than >> via IR. >> >> Re: your query concerning burning, I did a quick install last night on >> my nephew's eCS 1.2 workstation of RSJ 6.01 (Sony CD-RW). After a >> reboot, it worked exactly as expected. I suspect your trouble may either >> lie in the CONFIG.SYS entries about which it seems to be complaining or >> possibly an incompatible firmware rev (incompatible version 6 of RSJ). >> Perhaps you're loading the RSJSCSI driver as well as Dani? Check your >> entries. Also, Al makes a very good point about LOCKCDR, which can also >> create some issues when it conflicts with Dani. >> >> Cheers. >> >Here if I REM LOCKCDR.FLT or RSJSCSI.SYS it no longer finds the burner. >This is on eCS 2.0 RC1. Perhaps it is the sorting of Config.sys during >the install, but all this works fine with 5.06. Can you post all the >sequence of config.sys lines that effect RSJ? Al just posted most but >not the DANIATAPI.FLT line. Here I have: > DEVICE=H:\PROGRAMS\RSJCD\RSJSCSI.SYS /S > IFS=H:\PROGRAMS\RSJCD\CDWFS.IFS > BASEDEV=OS2ASPI.DMD /ALL > DEVICE=H:\OS2\BOOT\ASPINKK.SYS /v <- This is a replacement for ASPIROUT > that is included with DVDDAO > BASEDEV=DaniATAPI.FLT /RSJ > BASEDEV=LOCKCDR.FLT -v > RUN=H:\PROGRAMS\RSJCD\CDWFSD.EXE -p "F:/temp" -c200000 -b20480 -t2 -i3 >-s0 BASEDEV=DaniATAPI.FLT /RSJ BASEDEV=LOCKCDR.FLT -v These are fighting with each other, BASEDEV=LOCKCDR.FLT -v is not needed when you have BASEDEV=DaniATAPI.FLT /RSJ I have BASEDEV=DaniATAPI.FLT /RSJ in my config.sys, but not with RSJ lines. If RSJ finds BASEDEV=DaniATAPI.FLT /RSJ RSJ will not install BASEDEV=LOCKCDR.FLT -v. With BASEDEV=LOCKCDR.FLT -v all drive letters are changed here System becomes under RSJ S Z T Y U S With out BASEDEV=LOCKCDR.FLT -v S,T, & U remain Do this: 1- I Put a CD with data on it in CD drive T:\ 2- Attach as T:\ as Z: 3- Read CD as T:\ 4- Read CD as Z:\ Regards Al -- (\__/) (='.'=) This is Bunny. (")_(") Copy and paste bunny into your signature to help him gain world domination. ***************************************** * Alan Townsend Sechelt, BC Canada * * E-Mail: altownsend@dccnet.com * Home Page: * Tel: (604) 885-0943 * * Mr2 Ice: Reg #582 ***************************************** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to To switch to the INDEX mode, E-mail to Send administrative queries to To subscribe (new addresses), E-mail to: and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=