Mailing List os2-wireless_users@2rosenthals.com Archived Message #5837

From:	"Carl Gehr" <os2-wireless_users@2rosenthals.com>	Full Headers Undecoded message
Sender:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>
Subject:	Re: [OS2Wireless] Setting up ThinkPad T43 for wireless use
Date:	Fri, 20 Jul 2007 20:24:02 -0400 (EDT)
To:	"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

On Thu, 19 Jul 2007 19:49:33 -0400, bokeny wrote: >Well, it took me half a day to screw my system up, luckily no more than >1/2 our to recover. I think I misquoted the pci.exe report. > > Vendor 8086h Intel Corporation > Device 4224h PRO/Wireless 2915ABG Network Connection > >I tried GenMAC Wrapper Intel 2915 a/b/g [8086:4224], there is also >[8086:4223] which I have not tried. Your device [based on the PCI info] is the 4224 level. So, you want to use the set of files named: WRAPPER_8086_4224 that should have been in the initial GenMac V2.00, along with the base files indicated. But, to be sure, you should get the latest 'experimental' level of GehNac so you have the most recent updates to GENM32W.OS2 and HELPERW.EXE. > >I have the following in the 'Adapter and Protocol Configuration ' page, >in 'Stage 3 - Review the current configuration: Broadcom Ethernet....... > 1 - IBM OS/2 NETBIOS > 0 - IBM OS/2 NETBIOS OVER TCP/IP > 0 - IBM TCP/IP >(I guess that was the default. It has been working well with wire.) If >I add GenMAC Wrapper Intel 2915 a/b/g [8086:4224] (providing that is >what I need to add), where will this go, before or after Broadcom >Ethernet? Also, what will the logical adapter numbers be? > ? - IBM OS/2 NETBIOS > ? - IBM OS/2 NETBIOS OVER TCP/IP > ? - IBM TCP/IP >Am I even on the right track? I think I fallowed the VOICE write-up on >this subject close, but some of the instruction were not matching what I >had on my screen. I just made the best guesstimate. Unless you are absolutely sure you need NETBIOS, I'd stick with *only* TCP/IP. At the very least, get your system working with the basics first, then you can add NETBIOS OVER TCP/IP. [I could be wrong, but I believe, if you have this, you will not need native NETBIOS.] Good luck, Carl =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list <os2-wireless_users@2rosenthals.com>. To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com> To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com> To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com> Send administrative queries to <os2-wireless_users-request@2rosenthals.com> To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster