Thanks, again, Sam. I'll try to dig out the references. The 'table'
stuff might help me understand some of the stuff in new ACPI/APC setup
for SMP operation. [I'm clueless there also!]
Eventually, I'd like to understand what the TPads are trying to do.
But, since Kris said that making a change might create more havoc, I'll
just leave well-enough alone.
On Sun, 21 Jan 2007 20:07:19 -0600, Sam Lewis wrote:
>Carl Gehr wrote:
>
>>Sam,
>>
>>I guess I'm just blind, but all I see are, essentially, ReadMe type
>>files that indicate the changes related to IRQs. Do you have a
>>specific file name that I should look for?
>>
>>
>
>The readme I'm referring to is by the original PCI developer. It is in
>the PCI104VKA.zip. I don't know the exact name right now.
>
>>I don't see anything that explains WHAT to change in the BIOS or what
>>the BIOS settings even mean.
>>
>
>What I am referring to is a general explanation how PCI architecture
>uses BIOS routing tables and such. It doesn't provide specific info on
>your BIOS.
>
>> This is really something that should be
>>provided as part of the system documentation, but unfortunately, it's
>>not there.
>>
>>
>
>If thought maybe some general info would help you diagnose your real
>problem. Sorry but I don't know anything about your specific system
>hardware. I was just trying to point out a resource I found interesting
>and informative.
>Sam
>
>>Carl
>>
>>On Sun, 21 Jan 2007 15:17:41 -0600, Sam Lewis wrote:
>>
>>
>>
>>>The .txt files with the PCI program have a very good explanation of how
>>>PCI resources are utilized. Also he has some web links on further
>>>information. And the PCI program will let you know of some resource
>>>conflicts and errors that are helpful.
>>>Sam
>>>
>>>Carl Gehr wrote:
>>>
>>>
>>>
>>>>On Sun, 21 Jan 2007 18:45:31 +0100, Kris Steenhaut wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Could you check in the bios of the TP43 whether everything defaults to
>>>>>irq 11?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>On my TPad T60, everything does default to IRQ=11. But, I have no clue
>>>>how to relate the 'things' that are defaulting to any particular
>>>>device. Nor do I have any idea what other values/settings should be
>>>>used.
>>>>
>>>>I would really appreciate a little tutorial on what all that stuff
>>>>means and what I can/should do about it.
>>>>
>>>>TIA,
>>>>Carl
>>>>
>>>>
>>>>
>>>>
>
>
>Scanned by WinProxy
>http://www.Ositis.com/
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>This message is sent to you because you are subscribed to
> the mailing list <os2-wireless_users@2rosenthals.com>.
>To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
>To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
>To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
>Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
>To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
>
>This list is hosted by Rosenthal & Rosenthal
>P.O. Box 281, Deer Park, NY 11729-0281. Non-
>electronic communications related to content
>contained in these messages should be directed
>to the above address. (CAN-SPAM Act of 2003)
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
back to list