X-Account-Key: account1
X-UIDL: 104715
X-Mozilla-Keys:                                                                                 
Return-Path: <os2-wireless_users-report@2rosenthals.com>
X-ListServer: CommuniGate Pro LIST 5.1.3
List-Unsubscribe: <mailto:os2-wireless_users-off@2rosenthals.com>
List-ID: <os2-wireless_users.2rosenthals.com>
List-Archive: <http://2rosenthals.com:8100/Lists/os2-wireless_users/List.html>
Precedence: list
Message-ID: <list-1238211@2rosenthals.com>
Reply-To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Sender: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
X-Original-Message-ID: <4683D35A.4090204@2rosenthals.com>
Date: Thu, 28 Jun 2007 11:27:22 -0400
From: "Lewis G Rosenthal" <os2-wireless_users@2rosenthals.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Subject: Re: [OS2Wireless] TP30 plus GENMAC under eCS 2.0RC1

On 06/28/07 06:02 am, Ed Durrant thus wrote :
> Mark Henigan wrote:
>>
>> Hello:
>>
>> I had significant problems with the miniPCI adapter
>> installation and eventually had to remove the card
>> in order to be able to connect to the Internet.
>>
<snip>
> On the T30 use the soundmax audio drivers from the IBM website rather 
> than UniAud.
>
On my wife's machine, I'm using UNIAUD with the 2915ABG (same PCI ID as 
the card I sold to Mark).
> I don't think the STACK32 is the problem.
>
Perhaps not with newer versions of UNIAUD; I haven't tried.
> I know there is a new version of Genmac being developed, perhaps that 
> will support the 2915ABG better ?
>
Once we got support for the 4224, it's been pretty stable (the newer 
Intel NDIS5 driver has helped quite a bit, too).
> Also try installing WiFi on its own without the Intel Pro/100 driver 
> (which should be the native driver - not Genmac wrapper)
>
Yes!! This is a very good point, Ed, and I hadn't even thoguth to 
mention it in my new thread to Mark. I have been unable to get GenMAC to 
run both the Intel Pro/100 *and* the 2915 in the same configuration (on 
the T43, I use the native Broadcom driver, so I had forgottom about the 
T30 with the - better, IMO - Intel NIC). This is an important step.
> Only load the TCPIP protocol to the card.
>
Right. Another point I neglected to stress in my earlier post. GenMAC 
seems to have trouble with multiple binds to the same device. My symptom 
is a hang running NETBIND.EXE at boot when attempting to bind IP and IPX 
to the wireless NIC.

This is a great list. Thanks (everyone) for contributing.

-- 
Lewis
------------------------------------------------------------
Lewis G Rosenthal, CNA, CLP, CLE
Rosenthal & Rosenthal, LLC
Accountants / Network Consultants
  New York / Northern Virginia           www.2rosenthals.com
eComStation Consultants                  www.ecomstation.com
Novell Users Int'l       www.novell.com/openenterpriseserver
Need a managed Wi-Fi hotspot?               www.hautspot.com
------------------------------------------------------------


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=