Precedence: list
Message-ID: <list-1236467@2rosenthals.com>
Reply-To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Sender: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Date: Wed, 27 Jun 2007 20:01:18 +1000
From: "Ed Durrant" <os2-wireless_users@2rosenthals.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Subject: [OS2Wireless] TP30 plus Intel 2200BG under eCS 2.0RC1

Well after a few changes, I'm getting promising signs (but not there yet).

I am using XWLAN v 3.0 and Genmac v 2.01.

I think the turning point was NOT to have the TCPIP interface defined 
and active in TCPCFG2, rather to let XWLAN create the connection. 
(earlier versions of Genmac/XWLAN I could only get to work by having the 
second interface defined nd configured in TCPCFG2).

Now however, when I boot the system it makes a whole series of fault 
tones for about 30 seconds while XWLAN is loading and then pops up the 
IP range conflict error asking me whether I want LAN0 (the cabled 
connection) nullifying so that Wifi can operate. Selecting yes here 
unfortunately does not allow the WiFi to operate, rather it gives a red 
bars symbol indicating that I am out of range of my WiFi access point, 
which happens to be about 2 metres away.

To me this looks and sounds like an IRQ conflict, possibly with audio.

Do we still have a problem with UniAud ? As of course the eCS install, 
installed UniAud rather than the OS/2 driver for the on-baord audio chipset.

I'll try disabling UniAud and see how WiFi works then.

Apparently there is a later version of the UniAud DLL (needed by the 
latest WarpVision build among other things) - perhaps that'll solve the 
problem as well.

Cheers/2

Ed.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=