Precedence: list
Message-ID: <list-1228787@2rosenthals.com>
Reply-To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Sender: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
From: "Carl Gehr" <os2-wireless_users@2rosenthals.com>
Date: Wed, 20 Jun 2007 17:42:14 -0400 (EDT)
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Subject: Re: [OS2Wireless] TP Hibernation

On Wed, 20 Jun 2007 21:46:56 +0200, Robert Henschel wrote:

>Hakan wrote:
>>> I am not sure of the card in the T43 but my T42 I am able to split the 
>>> desktop between LCD and monitor but I cannot set the resolution 
>>> seperately (e.g. I set base resolution of 1400x1050 and across both 
>>> monitors it is 2800x1050).  For the laptops only ATI cards will do 
>>> this as far as I know and then it is not a "supported" feature (not 
>>> that SNAP has support at this point) but works quite well (worked with 
>>> ATI mobility radeon 7500 ad 9600 here).
>>> Andy
>> 
>> Although my T43p also has an ATI chip identifed as ATI Mobility Radeon
>> X600, I could not get multi-head to work.
>I have the same T43p, and I can get it to work. Here is how. Get the
>latest SNAP, and then run "gaoption" two times:
>1. gaoption lcdusebios off
>2. gaoption noncert on
>
>This should give you the image internal or external or both, enable this
>via pressing FN-F7 multiple times. This has to work before you can play
>with multi-head!
>Now you can continue to setup multi-head via the screen notebook. Be
>sure that you see the textmode messages during boot ONLY on the internal
>LCD (toggle via FN-F7 again), the external one will become active when
>SNAP loads. (if I see the textmode messages on both or on the external
>screen, SNAP dies when switching to graphics mode)
>
>Most of this is taken from an IRC session with Andy Willis a year or two
>ago, THANKS again Andy!
>
>Robert
>
>-- 
>Robert Henschel

Thanks, to Andy and Robert!

When my 'Round Tuit' ;-) arrives, I'll have to try the process
provided.

Carl


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=