X-Account-Key: account1 X-UIDL: 90840 X-Mozilla-Keys: Return-Path: X-ListServer: CommuniGate Pro LIST 5.1.3 List-Unsubscribe: List-ID: List-Archive: Precedence: list Message-ID: Reply-To: "OS/2 Wireless Users Mailing List" Sender: "OS/2 Wireless Users Mailing List" To: "OS/2 Wireless Users Mailing List" From: "Hakan" Date: Sun, 22 Apr 2007 14:06:50 -0400 (EDT) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Original-Message-ID: <0MKp2t-1HfgSp0no4-00006N@mrelay.perfora.net> Subject: Re: [OS2Wireless] Trouble Connecting to Router Yes, I have no problems connecting to either public nets or those using WEP encryption. On Sun, 22 Apr 2007 11:04:32 -0700, Isaac Leung wrote: >I'm assuming you have set up GenMAC before? I just installed as >instructed and use XWLAN to enable the wireless after my desktop >starts up. (Now my wired seems to be busted, but that's a nother >issue...) > >The first thing I usually do is to get rid of all security settings to >make sure that is not the issue. > >Also, not sure if this will help, but I had the following experience >with my machine (it is T40p with the Atheros built-in wireless) >- With v1.6 (and earlier) of GenMAC it never had a problem connecting, >fast and reliable. >- With v2.0, very problematic, lucky to connect at all, and when it >did, it would fail in a few minutes. >At this time, I was using a Netgear wireless router (no problem with >Windows or a couple of other machines). >I recently switched over to a D-Link router, and very surprisingly, >v2.0 now works. It is not as good as v1.6, it still takes A LONG time >to acquire the first signal, but it functions and generally stays up. > >Hopefully this is not your problem, since you'd have to get someone >else with the exact same pairing of router & wifi chipset to check it >out or back level to v1.6 if you can get a hold of it. > > >Isaac > >On 4/22/07, Hakan wrote: >> I am trying to connect wirelessly to a Linksys WRT54GL router 3 feet >> from my TP43p with an Intel 2915a/b/g card and using eCS 1.2R. I have >> full control of the router and the following options are set: >> Basic Wireless Settings: >> * Mixed wireless mode >> * SSID transmitted >> * Channel 3 used (and no other networks on this channel >> * SES inactive >> Wireless Security Mode: >> * WPA2 Personal security mode >> * AES WPA algorithm >> * WPA Shared key defined >> * 3600 seconds for group key renewal >> Wireless MAC Filter: >> * No wireless MAC filter >> The following are the default Advanced Wireless Settings: >> * Basic rate default >> * Transmission Rate auto >> * CTS Protection Mode disabled >> * Frame Burst disabled >> * Beacon Interval 100 milliseconds >> * DTIM Interval 1 >> * Fragmentation Threshold 2346 >> * RTS Threshold 2347 >> * AP Isolation off >> * SecureEasySetup enabled >> >> I have no problems connecting using a wire but obviously something >> needs to be changed to get the wireless connection going. >> >> What might I need to change? Or, look into? >> >> Hakan >> >> >> >> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >> This message is sent to you because you are subscribed to >> the mailing list . >> To unsubscribe, E-mail to: >> To switch to the DIGEST mode, E-mail to >> To switch to the INDEX mode, E-mail to >> Send administrative queries to >> To subscribe (new addresses), E-mail to: and reply to the confirmation email. >> Web archives are publicly available at: http://lists.2rosenthals.com >> >> This list is hosted by Rosenthal & Rosenthal, LLC >> P.O. Box 281, Deer Park, NY 11729-0281. Non- >> electronic communications related to content >> contained in these messages should be directed >> to the above address. (CAN-SPAM Act of 2003) >> >> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >> >> > >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= >This message is sent to you because you are subscribed to > the mailing list . >To unsubscribe, E-mail to: >To switch to the DIGEST mode, E-mail to >To switch to the INDEX mode, E-mail to >Send administrative queries to >To subscribe (new addresses), E-mail to: and reply to the confirmation email. >Web archives are publicly available at: http://lists.2rosenthals.com > >This list is hosted by Rosenthal & Rosenthal, LLC >P.O. Box 281, Deer Park, NY 11729-0281. Non- >electronic communications related to content >contained in these messages should be directed >to the above address. (CAN-SPAM Act of 2003) > >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This message is sent to you because you are subscribed to the mailing list . To unsubscribe, E-mail to: To switch to the DIGEST mode, E-mail to To switch to the INDEX mode, E-mail to Send administrative queries to To subscribe (new addresses), E-mail to: and reply to the confirmation email. Web archives are publicly available at: http://lists.2rosenthals.com This list is hosted by Rosenthal & Rosenthal, LLC P.O. Box 281, Deer Park, NY 11729-0281. Non- electronic communications related to content contained in these messages should be directed to the above address. (CAN-SPAM Act of 2003) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=