os2-wireless_users@2rosenthals.com Messaggio archiviato #6087

Da: "Isaac Leung" <os2-wireless_users@2rosenthals.com> Intestazioni complete
Messaggio non codificato
Mittente: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>
Oggetto: Re: [OS2Wireless] Trouble Connecting to Router
Data: Sun, 22 Apr 2007 11:04:32 -0700
A: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

I'm assuming you have set up GenMAC before? I just installed as
instructed and use XWLAN to enable the wireless after my desktop
starts up. (Now my wired seems to be busted, but that's a nother
issue...)

The first thing I usually do is to get rid of all security settings to
make sure that is not the issue.

Also, not sure if this will help, but I had the following experience
with my machine (it is T40p with the Atheros built-in wireless)
- With v1.6 (and earlier) of GenMAC it never had a problem connecting,
fast and reliable.
- With v2.0, very problematic, lucky to connect at all, and when it
did, it would fail in a few minutes.
At this time, I was using a Netgear wireless router (no problem with
Windows or a couple of other machines).
I recently switched over to a D-Link router, and very surprisingly,
v2.0 now works. It is not as good as v1.6, it still takes A LONG time
to acquire the first signal, but it functions and generally stays up.

Hopefully this is not your problem, since you'd have to get someone
else with the exact same pairing of router & wifi chipset to check it
out or back level to v1.6 if you can get a hold of it.


Isaac

On 4/22/07, Hakan <os2-wireless_users@2rosenthals.com> wrote:
I am trying to connect wirelessly to a Linksys WRT54GL router 3 feet
from my TP43p with an Intel 2915a/b/g card and using eCS 1.2R.  I have
full control of the router and the following options are set:
Basic Wireless Settings:
*       Mixed wireless mode
*       SSID transmitted
*       Channel 3 used (and no other networks on this channel
*       SES inactive
Wireless Security Mode:
*       WPA2 Personal security mode
*       AES WPA algorithm
*       WPA Shared key defined
*       3600 seconds for group key renewal
Wireless MAC Filter:
*       No wireless MAC filter
The following are the default Advanced Wireless Settings:
*       Basic rate default
*       Transmission Rate auto
*       CTS Protection Mode disabled
*       Frame Burst disabled
*       Beacon Interval 100 milliseconds
*       DTIM Interval 1
*       Fragmentation Threshold 2346
*       RTS Threshold 2347
*       AP Isolation off
*       SecureEasySetup enabled

I have no problems connecting using a wire but obviously something
needs to be changed to get the wireless connection going.

What might I need to change?  Or, look into?

Hakan



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
 the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=



Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster