I am trying to connect wirelessly to a Linksys WRT54GL router 3 feet
from my TP43p with an Intel 2915a/b/g card and using eCS 1.2R. I have
full control of the router and the following options are set:
Basic Wireless Settings:
* Mixed wireless mode
* SSID transmitted
* Channel 3 used (and no other networks on this channel
* SES inactive
Wireless Security Mode:
* WPA2 Personal security mode
* AES WPA algorithm
* WPA Shared key defined
* 3600 seconds for group key renewal
Wireless MAC Filter:
* No wireless MAC filter
The following are the default Advanced Wireless Settings:
* Basic rate default
* Transmission Rate auto
* CTS Protection Mode disabled
* Frame Burst disabled
* Beacon Interval 100 milliseconds
* DTIM Interval 1
* Fragmentation Threshold 2346
* RTS Threshold 2347
* AP Isolation off
* SecureEasySetup enabled
I have no problems connecting using a wire but obviously something
needs to be changed to get the wireless connection going.
What might I need to change? Or, look into?
Hakan
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com
This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
listeye geri dön