Nachricht #6236 aus Archiv der Liste os2-wireless

Nachricht #6236 aus Archiv der Liste os2-wireless_users@2rosenthals.com

Von:	"Lewis G Rosenthal" <os2-wireless_users@2rosenthals.com>	Kopfzeilen anzeigen E-Mail Quelltext
Betreff:	Re: [OS2Wireless] Wireless extension to LAN
Datum:	Thu, 17 Sep 2009 23:34:00 -0400
An:	OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>

Hi again... On 09/16/09 12:57 pm, Ray Davison thus wrote : I just replaced my WRT54G V4 with a WRT54GS V6. That seems to work. Can the WRT54G be a wireless extension of the LAN that is currently on the GS? They can talk to my laptop, can they talk to each other? If the WRT54G is flashed with DD-WRT it can act as a wireless repeater/bridge. This enables it to: 1. Act as a client to your existing wireless network (originating from your GS); 2. Broadcast Wi-Fi to other clients, thus extending your wireless range; 3. Allow wired connections on its four wired switch ports to bridge back to the GS for routing to the internet and/or bridging to the rest of your network Nothing should need to be done with your GS to make this happen. Flashing just the WRT54G should be sufficient. Tips for flashing: 1. Select the correct version for your hardware (there is a different build for the v6 as for the v4, etc.); 2. The v6 is a bit of a pain (as is the v5). You'll likely have to create a custom vx image (see: http://dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX#v5_and_v6 ); 3. Start with the micro-generic, as this is a smaller image, and will be less likely to result in a "bricked" router; 4. *If* you think you've bricked the router, don't panic; power it off for a couple of minutes before powering it back up - you should regain control; 5. Good tips for the v6: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486 Other third-party firmware may achieve the same result. I'm just accustomed to working with the DD-WRT stuff these days. FYI: I sell flashed WRT54GL units (new, and when I have them available, used - it would be disingenuous to say "refurbished"). If you have need of one of these already done, let me know. I also can handle flashing yours, for a small fee plus shipping. It's good experience to do it yourself, however, if you're so inclined. Lots of good information is available in the DD-WRT wiki: http://dd-wrt.com/wiki . The reason I use the WRT54GL is that the increased RAM makes it *much* easier to install custom firmware. The VXworks OS which ships on the v5 & v6 (and later, IIRC) has much slimmer memory requirements, thus LinkSys shipped those models with less overall memory, making them more difficult to tweak. HTH -- Lewis ------------------------------------------------------------- Lewis G Rosenthal, CNA, CLP, CLE Rosenthal & Rosenthal, LLC www.2rosenthals.com Need a managed Wi-Fi hotspot? www.hautspot.com Secure, stable, operating system www.ecomstation.com -------------------------------------------------------------

Abonnieren: Nachricht (Feed), Sammelnachricht (Digest), Index.
Abmelden
E-Mail an ListMaster