os2-wireless_users@2rosenthals.com ?????????????? ????? #6323

???:	"Lewis G Rosenthal" <os2-wireless_users@2rosenthals.com>	?? ???? ?????????
??:	Re: [OS2Wireless] Re: Cannot get DHCP
??:	Tue, 13 Oct 2009 11:43:25 -0400
??:	OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>

Some further thoughts... On 10/13/09 12:41 am, Stuart Updike thus wrote : Lewis G Rosenthal wrote: netstat -n <Enter> This file was recorded while the wireless (Interface 1) radio was disabled. Interface 0 Ethernet-Csmacd physical address 00028a2d2d8e MTU 1492 speed 100000000 bits/sec unicast packets received 3470 broadcast packets received 1 total bytes received 1068038 unicast packets sent 2926 broadcast packets sent 393 total bytes sent 459116 packets discarded on transmission 0 packets discarded on reception 0 received packets in error 0 errors trying to send 0 packets received in unsupported protocols 0 Interface 1 Ethernet-Csmacd physical address 0020e08f2e1c MTU 1500 speed 11000000 bits/sec unicast packets received 0 broadcast packets received 0 total bytes received 0 unicast packets sent 0 broadcast packets sent 1 total bytes sent 42 packets discarded on transmission 0 packets discarded on reception 0 received packets in error 0 errors trying to send 0 packets received in unsupported protocols 0 Interface 9 Software Loopback physical address 000000000000 MTU 1536 speed 0 bits/sec unicast packets received 0 broadcast packets received 0 total bytes received 0 unicast packets sent 9763 broadcast packets sent 0 total bytes sent 631210 packets discarded on transmission 0 packets discarded on reception 0 received packets in error 0 errors trying to send 0 packets received in unsupported protocols 0 Interesting. Is lan1 indeed the number of your wireless adapter? Yes, I deduced that from the order of the assignments in the router. Actually, the key is not the router, but in PROTOCOL.INI: <snip> [TCPIP_NIF] DriverName = TCPIP$ BINDINGS = E100BEO2_NIF,IBMPRISM_NIF,, Thus, the E100B driver is bound to lan0 and the IBM Prism driver is bound to lan1. Please ensure that you have *no* entries for lan1 in your TCP/IP configuration notebook. XWLAN should manage this entirely on its own. Could you please follow-up with a copy of \MPTN\BIN\SETUP.CMD as well as \MPTN\ETC\DHCPCD.CFG ? This is surely an odd one. The IBM prism driver is quite old, too, though I don't really suspect that that's the cause of this. If it were just an XWLAN thing, then I might lean in that direction (some lack of proper functionality for XWLAN to adequately see the device), but at the command line, it should behave. The dhcpmon -t command kills the DHCP client daemon, allowing it to switch to a different interface via the -i parameter. -- Lewis ------------------------------------------------------------- Lewis G Rosenthal, CNA, CLP, CLE Rosenthal & Rosenthal, LLC www.2rosenthals.com Need a managed Wi-Fi hotspot? www.hautspot.com Secure, stable, operating system www.ecomstation.com -------------------------------------------------------------

???????: ????, ??????, ??????.
?????????
??? ????????