On Thu, 15 Oct 2009 15:01:41 -0700 "Ray Davison" <os2-wireless_users@2rosenthals.com> wrote:
>Lewis G Rosenthal wrote:
>>
>> It sounds to me like an address conflict. Are you *certain* that you
>> have no other device with the same static IP on either end of the link
>> as the G?
>
>G should be the first and only device here with a fixed IP.
>
That doesn't mean that there still isn't a conflict somewhere. I mentioned static IP, but if the address conflicts with something already assigned by DHCP, the result is the same.
What's your DHCP range?
>> With the G turned off, can you ping its address and get any
>> response (telltale sign)?
>
>I couldn't get any response with it turned ON.
>
That's not what I asked. ;-) If two devices are on the same IP address, it is likely that you wil not get a response when they are both turned on. They may both respond to the ping, but your sation may not receive the reply.
However, with one - and only one - device powered on, you *should* get a response. If the G is OFF, and you were to get a response on that address, it indicates that something *else* is listening on it. That would, therefore, point to an address conflict when the G is turned ON.
Also, try flushing your arp cache before pinging:
arp -f (OS/2; I can't recall Windows, but instead of "flush," the command "deletes all" - perhaps arp /d *)
>> If using WPA or WPA2, you should enable broadcast of the
>> SSID, BTW.
>
>I followed this.
>http://www.dd-wrt.com/wiki/index.php/Wireless_Bridge#A_Practical_Example
>
>"Wireless Tab — Basic Settings Subtab
>
> 5. Wireless SSID Broadcast is not relevant in Client Bridge mode."
>
>Also, I do not find SSID Broadcast in DD-WRT as configured.
>
No, SSID broadcast in the GS. The G is acting like a client, a broadscasting is irrelevant as such. Only APs broadcast (or not).
>> log into the G and look at your connected devices. Make sure they're all there, and
>> that nothing has a conflicting address (it shouldn't, or it wouldn't likely be listed).
>>
>Look where?
>
On the status page, you can see all connected devices.
This thread is moving rapidly from OT to TOT. If there's no objection, considering the hardware & firmware we're discussing, we'll continue. Otherwise, we should take this off-list.
___
Lewis G Rosenthal
Rosenthal a Rosenthal, LLC
Sent with SnapperMail
torna alla lista