There are no settings in the BIOS for memory, except for how much will
be used for the video card. I was only using 32MB for the Video but
when I upgraded the RAM I changed it to 128MB. I'll try and put that
back to 32MB and see what happens.
Thanks,
Sam
On Mon, Dec 28, 2009 at 7:14 PM, Lewis G Rosenthal
<os2-wireless_users@2rosenthals.com> wrote:
> Hi, guys...
>
> On 12/28/09 07:43 pm, Sam Lewis thus wrote :
>>
>> I thought some folks were having some kind of issue like this a while
>> back. I had been running Genmac 2.00, so I first updated to 14.104a
>> kernel and that didn't make a difference so I updated to Genmac 2.20,
>> with that it will boot but the wifi won't work. When doing the scan
>> the Wifi light just comes off and on, not quite a blink.
>> Thanks,
>> Sam
>>
>> On Mon, Dec 28, 2009 at 6:38 PM, Chuck McKinnis
>> <os2-wireless_users@2rosenthals.com> wrote:
>>
>>>
>>> My Lenovo T61 runs eCS 2.0RC7 with 2 Gb, GENMAC and all.
>>>
>>> Sam Lewis wrote:
>>>
>>>>
>>>> Has anyone had trouble with Genmac after installing 2GB of RAM? I
>>>> have had eCS 1.2r on my HP/Compaq Presario Notebook for 3 or so years
>>>> with no problems. I just upgraded the system from 512MB to 2GB and
>>>> now it won't boot after loading Genmac. I can drop it to 1GB and it
>>>> will work.
>>>>
>>>> I reverted back to the wired Realtek interface and it now works fine.
>>>>
>
> Sam, what card is that in your machine, and what files *specifically* do you
> have in the WRAPPER directory? My thinking is that this may be related to
> the Windows driver component (and perhaps its interaction with GenMAC) and
> not something which is directly related to GenMAC. I recently built a system
> with an Intel 2915ABG wireless card and 4GB RAM; no problems booting
> whatsoever.
>
> The issue which some saw was with booting the eCS CD itself with more than
> 1GB RAM, but this has since been addressed. Also, are there any
> memory-specific settings in the BIOS which you can try toggling (one at a
> time, preferably) to see if they have any effect? Perhaps with more than 1GB
> of RAM, the system is automatically mapping something to a previously
> uninstalled memory address.
>
> --
> Lewis
> -------------------------------------------------------------
> Lewis G Rosenthal, CNA, CLP, CLE
> Rosenthal & Rosenthal, LLC www.2rosenthals.com
> Need a managed Wi-Fi hotspot? www.hautspot.com
> Secure, stable, operating system www.ecomstation.com
> -------------------------------------------------------------
>
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> This message is sent to you because you are subscribed to
> the mailing list <os2-wireless_users@2rosenthals.com>.
> To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
> To switch to the DIGEST mode, E-mail to
> <os2-wireless_users-digest@2rosenthals.com>
> To switch to the INDEX mode, E-mail to
> <os2-wireless_users-index@2rosenthals.com>
> Send administrative queries to <os2-wireless_users-request@2rosenthals.com>
> To subscribe (new addresses), E-mail to:
> <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
> Web archives are publicly available at: http://lists.2rosenthals.com
>
> This list is hosted by Rosenthal & Rosenthal, LLC
> P.O. Box 281, Deer Park, NY 11729-0281. Non-
> electronic communications related to content
> contained in these messages should be directed
> to the above address. (CAN-SPAM Act of 2003)
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
back to list