On Mon, Dec 28, 2009 at 9:18 PM, Lewis G Rosenthal

Hmmm... My first inclination would have been something to do with the amount
of video RAM you reserved. As that appears to not be the case (you did power
cycle after making that change, didn't you?), I might suspect something with
the Windows driver itself. Do you have Windows installed on the machine? I'd
be curious to know what version/timestamp the .inf & .sys files show.

The BIOS does an automatic power cycle when you save and exit.

I do have Windoze XP setup as dual boot on this machine, hence the
need for 2GB or RAM.

The driver in the Genmac package is dated 2004 and the one in XP is
2005.  The .inf file in XP is over 600k and the one in the genmac
package is only 1.7k so I don't know if it is the same/correct format.

Are the .inf and the .sys a set or can you just replace the .sys only?
 I may just give a try anyway.

Thanks,
Sam

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=