Lewis G Rosenthal wrote:

On 02/21/10 03:32 am, Thomas Dennis thus wrote :

Hi All:
I must have done something right because I now get the
GenMac Sign-on message.  But there is a small detail that
I haven't been able to correct.
And that's a green blinking notice that:
"No valid hardware found for (WRND32$)"
I don't remember where and I can't seem to be able to
find a reference to 'adding the word Unsupported' in
any of the posts left on my PC.
Can someone refresh my memory?

First, remember that "unsupported" mode may or may not work for your AR5008 chipset. You should review my Warpstock presentation on setting this up, which is available here:

http://www.warpstock.org/filemgmt/visit.php?lid=123

That should answer any questions you may have concerning how to set this up.

PS - The LANTRAN log won't give us the info we need at this point. If you get the driver recognized and then can't get protocols to bind or whatever, *then* LANTRAN.LOG may be helpful.

Cheers/2

Lewis:
There are some questions that I need to ask to bring me
up to speed in this area.  They may sound a little dumb,
but it's to see if I understand.  To sort out in my head
what to believe and what to forget.  What is this section in the PROTOCOL.ini [W8086x4224_NIF]
designed for. It looks like it would be something for an Intel chip.
I have no such entry in my PROTOCOL.ini.

Is that due to the fact that the Chip Set in the D-Link
card is from Atheros?

Enclosed is what I have done with my limited knowledge on
the subject.

I also would like to know more about the NDIS_SYS = and
NDIS_INF =.  When comparing .ini entry with yours they
are different.

From where do these two entries originate?
If my understanding is correct than these two files should
be in x:\IBMCOM\MACS but these files aren't there.

Are they in the WarpIN pakage?

Or are these two from Windows?

How much have I gotten right?

Just so you'll know, in the .rtf file all bold values are
original.  The other values I added/changed.