Hello Thomas,
On Mon, 22 Feb 2010 18:47:51 +0100, Thomas Dennis wrote:
>Lewis G Rosenthal wrote:
>> Hi, Thomas...
>>
>> Thomas Dennis wrote:
>>> Lewis G Rosenthal wrote:
>>>>
>>>>
>>>> On 02/21/10 03:32 am, Thomas Dennis thus wrote :
>>>>> Hi All:
>>>>> I must have done something right because I now get the
>>>>> GenMac Sign-on message. But there is a small detail that
>>>>> I haven't been able to correct.
>>>>> And that's a green blinking notice that:
>>>>> "No valid hardware found for (WRND32$)"
>>>>> I don't remember where and I can't seem to be able to
>>>>> find a reference to 'adding the word Unsupported' in
>>>>> any of the posts left on my PC.
>>>>> Can someone refresh my memory?
>>>>>
>>>> First, remember that "unsupported" mode may or may not work for your
>>>> AR5008 chipset. You should review my Warpstock presentation on
>>>> setting this up, which is available here:
>>>>
>>>> http://www.warpstock.org/filemgmt/visit.php?lid=123
>>>>
>>>> That should answer any questions you may have concerning how to set
>>>> this up.
>>>>
>>>> PS - The LANTRAN log won't give us the info we need at this point.
>>>> If you get the driver recognized and then can't get protocols to
>>>> bind or whatever, *then* LANTRAN.LOG may be helpful.
>>>>
>>>> Cheers/2
>>>>
>>> Lewis:
>>> There are some questions that I need to ask to bring me
>>> up to speed in this area. They may sound a little dumb,
>>> but it's to see if I understand. To sort out in my head
>>> what to believe and what to forget. What is this section in the
>>> PROTOCOL.ini [W8086x4224_NIF]
>>> designed for. It looks like it would be something for an Intel chip.
>>> I have no such entry in my PROTOCOL.ini.
>> Nor should you. Indeed, that is the entry for *my* Intel chip. Yours
>> will be something like [W168Cx001C_NIF] for an Atheros AR5008, for
>> example.
>>> Is that due to the fact that the Chip Set in the D-Link
>>> card is from Atheros?
>> Yes. The 168C is the manufacturer code, and the 001C is the model
>> code. Put them together (168C:001C) and you have a PCI ID string. Each
>> PCI device has a (hopefully) unique ID string.
>>> Enclosed is what I have done with my limited knowledge on
>>> the subject.
>> You have a semantic error in your PROTOCOL.INI:
>>
>> [W168CX001B_nif]
>>
>> DriverName = WRND32$
>> VENDOR = 0x168C
>> DEVICE = 0x001C
>> NDIS_SYS = "A3AB.SYS"
>> NDIS_INF = "A3AB.INF"
>> SSID = "WLAN"
>> DEBUGLEVEL = "NONE"
>> OPTIONS = "UNSUPPORTED"
>>
>> For clarity, rename your wrapper directory to exactly match your
>> device ID (i.e., W168X001C) and clean up your POTOCOL.INI entries to
>> match. Leave your SSID set to ANY instead of WLAN, too (though this is
>> probably immaterial).
>>> I also would like to know more about the NDIS_SYS = and
>>> NDIS_INF =. When comparing .ini entry with yours they
>>> are different.
>> Because our cards are different. These refer to the filenames of the
>> Windows driver files located in the wrapper directory.
>>> From where do these two entries originate?
>>> If my understanding is correct than these two files should
>>> be in x:\IBMCOM\MACS but these files aren't there.
>> No. Only the GenMAC nif and GENM32W.OS2 driver will be there. The
>> wrapper files stay under the GenMAC tree.
>>
>> Your wrapper nif is also incorrect. Under the FILE section, it should
>> read:
>>
>> [FILE]
>> Name = GENM32W.OS2
>> Path = IBMCOM\MACS
>>
>>> Are they in the WarpIN pakage?
>> Only *supported* drivers are in that package.
>>> Or are these two from Windows?
>> Yes. You need to put them in your wrapper directory.
>>> How much have I gotten right?
>> Some!
>>> Just so you'll know, in the .rtf file all bold values are
>>> original. The other values I added/changed.
>>>
>> Is A3AB.SYS indeed the name of the Windows driver for the AR5008
>> chipset, and/or the card you are trying to use? If so, we may indeed
>> get lucky. Otherwise, you'll need to adjust accordingly, by putting
>> the actual driver and inf (or reg export) in the wrapper directory and
>> making the appropriate changes to PROTOCOL.INI.
>>
>Lewis:
>The Windows drivers for the D-Link/AR5008 card are
>"ar5416.sys" and "net5416.inf".
>Question.
>Where should I put these files so the program can
>find them?
Are you sure the device ID of your card is 168C:001C ? Did you check that
with a PCI sniffer program?
I have an Atheros AR5006 in my netbook, with device ID 168C:001C and it is
working with Genmac. There are some limitations though, if I try to bind
TCPBEUI or NETBEUI to the adapter then my networking doesn't work anymore.
TCP/IP does work and with the Samba client (and netdrive) I can share files.
Nazaj na seznam