Al Heath wrote:

Pardon my (hopefully) short hijack.  I have T22 and have been using a
NetGear WG511T card  (for years now) with CBEnable, etc.  It still works
fine, but I just noticed that somehow in my playing around with various
upgrades that my config.sys now has APM.SYS, VAPM.SYS, APMDAEMN.EXE
commented out and has PSD=ACPI.PSD inserted...  I must have done something
at sometime I don't recall, but what is the "clean eCS way" to get rid of
ACPI and back to just old APM?  (As I recall, this is RC 5 on there) Or as
I've experienced no harm ... should I just not fix what ain't broke?  I
could just compare my old Warp4 config.sys to the test eCS one and manually
zap from there, but thought surely there must be a uninstall? Anyway, just
FYI I use the T22's audio line input a lot these days whereas my T42p and
T43p don't have that, and the desktop towers are too much to lug around.
Too bad some features disappear from later laptop models.

My basic question was what is the "clean eCS way" to get rid of ACPI and
back to just old APM?

Al H

If everything is working then you could leave well enough alone but all I do to switch back and forth is REM out whichever I am not using (APM or ACPI).  You could just as easily delete the ACPI entries and probably the APM is just REMed out so would just need to remove the REM.

Here are the APM lines
DEVICE=D:\OS2\BOOT\APM.SYS
DEVICE=D:\OS2\MDOS\VAPM.SYS
RUN=D:\OS2\APMDAEMN.EXE

And the ACPI ones.
REM psd=acpi.psd
REM basedev=apm.add
REM RUN=d:\os2\cmd.exe /Q /C d:\os2\AcpiDaemon.exe >d:\acpid.log
REM basedev=acpica.add

acpica.add is not used in later versions and thus may not be present.
Andy

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
 the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=