os2-wireless_users@2rosenthals.com ?????????????? ????? #6713

???: "chekmarx" <os2-wireless_users@2rosenthals.com> ?? ????
?????????
??: Re: [OS2Wireless] Wireless router
??: Thu, 25 Mar 2010 17:37:47 -0400
??: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

You should be able to configure the router via a web-browser.  The necessary IP should be in the docs that came with the router, or simply use google to find it.  I can't remember what the IP for mine is off the top of my head since it has been years since I needed to make any changes, but many different brands of routers use the same IP to access the built-in configuration HTML page.

Basically, no drivers are required!

On Thu, Mar 25, 2010 at 5:32 PM, KNIBBS P.M. <os2-wireless_users@2rosenthals.com> wrote:

Hello

As an old time OS/2 eComStation user, now having to use Windoze for work reasons, I would like to try to re-engage with the OS that i got to know and respect -- Os/2 .
I have a US Robotics wireless router and would like to know if there are eComStation drivers for this router.... or is there a way to set this router up under eComStation?

Or do I need a new eComstaion-compatible router?

And if so which one do I buy (in England)?


Peter Knibbs

England



-----Original Message-----
From: chekmarx [mailto:os2-wireless_users@2rosenthals.com]
Sent: Thu 25-Mar-10 8:58 PM
To: OS/2 Wireless Users Mailing List
Subject: Re: [OS2Wireless] Wireless router

Hi Mike,

No can do on getting a UPS as my living space is just too small as it is.
My apartment is basically three rooms - a large kitchen, a full bathroom,
and a large living/bed room.  Which houses my bed, a triple-dresser (with
only a tiny closet I have to keep all seasonal clothing in the dresser), a
19" flat-screen CRT television with digital cable box and DVD player, my
computer desk and chair, a Mesa-Boogie Studio Caliber guitar amplifier, two
electric guitars on wall hangers, my newly bought Ibanez electric-acoustic
in a floor stand, a small Traynor practice amp, my large DigiTech
guitar-modeler hardware, assorted effects petals and guitar cables, a
nightstand, and finally a wooden floor stand just large enough to hold my
Brother color laser printer.  Whew!  I'm exhausted just writing it all out
...

So as you can see, if I can avoid adding any more *physical* items that
would take up floor space the better off I am ...

I bought my guitar-modeler (a DigiTech GNX3000 for full digital recording
and modeling of assorted vintage and new amps along with a slew of digital
guitar effects) without taking into consideration the space needed for
hooking it up to my newly purchased Gene Alexander computer.  As it stands
three-months later, I have to figure out the placement of the gear, as I
need to run the DigiTech through the Mesa-Boogie amp's effects loop, then
into my computer, also allowing for plugging in my guitar (which obviously I
have to allow for the length of a full size Les-Paul guitar) into the
modeler.  So basically I need to wait for those times when my back and knee
problems allow for me to get down on the floor with a tape-measure and
layout all the recording and computer gear.  CAD is great for playing around
with various configurations, but the dimensions of everything has to 100%
accurate!  So I have my work cut out for me.  Plus, just writing this up I
realized I need to also allow for a stool for sitting when playing and
recording since my computer chair is unusable for sitting and playing a
guitar!

Yikes!

Greg


On Thu, Mar 25, 2010 at 3:46 PM, Mike O'Connor <
os2-wireless_users@2rosenthals.com> wrote:

> chekmarx wrote:
>
>> On Thu, Mar 25, 2010 at 2:47 PM, Will Honea <
>> os2-wireless_users@2rosenthals.com <mailto:

>> os2-wireless_users@2rosenthals.com>> wrote:
>>
>> <snip>
>>
>>    Just a thought for
>>    you:  those puny surge protector strips are very limited but
>>    (especially for
>>    phone lines) one at the point of entry cascaded with a second one
>>    several feet
>>    away near the actual equipment reduces the surge MUCH better than
>>    a single
>>    point protection scheme.
>>
>>
>> Thanks Will for the info.  I knew that the POS strips didn't do much to
>> protect electronic gear but I didn't know a two-strip approach would be a
>> better route to go.  I need to get some sort of protection for my new
>> system.  I was hoping to get something that would simply plug into a
>> two-gang receptacle, replacing the face-plate.
>>
>> Would you happen to have any suggestions for a quality piece?
>> (Basically money is no longer an issue.   I bought my system from Gene
>> Alexander of EERAC Computers and want it to be protected!)
>>
>> TIA
>> Greg
>>
>>    --
>>    Will Honea <whonea@whonea.net <mailto:whonea@whonea.net>>
>>
>>
>>  Hi Greg,
>
> Get yourself a UPS!
>
> Regards,
> Mike
>
> --
> Failed the exam for
> --------------------
> MCSE - Minesweeper Consultant and Solitaire Expert
> --------------------
> Personal replies to any of : mikeoc (at) internode (dot) on (dot) net
> mikeoc (at) austarnet (dot) com (dot) au
> majilok (at) gmail (dot) com
> [Please ZIP any attachments, other than GIF/JPG or plain-text]
> If you are missing a response from me - check Tweed Heads WX status at:
> http://www.bom.gov.au/products/IDR663.loop.shtml#skip
>
>
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> This message is sent to you because you are subscribed to
>  the mailing list <os2-wireless_users@2rosenthals.com>.
> To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
> To switch to the DIGEST mode, E-mail to <
> os2-wireless_users-digest@2rosenthals.com>
> To switch to the INDEX mode, E-mail to <
> os2-wireless_users-index@2rosenthals.com>
> Send administrative queries to  <
> os2-wireless_users-request@2rosenthals.com>
> To subscribe (new addresses), E-mail to: <
> os2-wireless_users-on@2rosenthals.com> and reply to the confirmation
> email.
> Web archives are publicly available at: http://lists.2rosenthals.com
>
> This list is hosted by Rosenthal & Rosenthal, LLC
> P.O. Box 281, Deer Park, NY 11729-0281. Non-
> electronic communications related to content
> contained in these messages should be directed
> to the above address. (CAN-SPAM Act of 2003)
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>


--

"Our Freedom is supported by five boxes: Soap, Ballot, Jury, Witness, and if
all else fails, Ammo."




--
"Our Freedom is supported by five boxes: Soap, Ballot, Jury, Witness, and if all else fails, Ammo."

???????: ????, ??????, ??????.
?????????
??? ????????