Poštni seznam arhiviranih sporo?il

Od: "KNIBBS P.M." <os2-wireless_users@2rosenthals.com> Glava
Izvorno E-sporo?ilo
Zadeva: RE: [OS2Wireless] Wireless router
Datum: Fri, 26 Mar 2010 10:23:17 -0000
Za: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

RE: [OS2Wireless] Wireless router

Sorry I'm a little rusty /stupid.

The last time I used eCS was before I went wireless and as far as I can remember the version of eCS I have (1.1 I think) didn't recognise the wireless card on my ThinkPad x31.

Yep so it's nothing to do with the router...I asked the wrong question.

What I really need to know is how can I set up eCS to recognise the wireless card on my thinkPad

....and from where can I get an up to date browser? The one I have.... Mozilla... is very old and flash etc doesn't work...

Cheers

Peter Knibbs
England


-----Original Message-----
From: chekmarx [mailto:os2-wireless_users@2rosenthals.com]
Sent: Thu 25-Mar-10 9:37 PM
To: OS/2 Wireless Users Mailing List
Subject: Re: [OS2Wireless] Wireless router

You should be able to configure the router via a web-browser.  The necessary
IP should be in the docs that came with the router, or simply use google to
find it.  I can't remember what the IP for mine is off the top of my head
since it has been years since I needed to make any changes, but many
different brands of routers use the same IP to access the built-in
configuration HTML page.

Basically, no drivers are required!

On Thu, Mar 25, 2010 at 5:32 PM, KNIBBS P.M. <
os2-wireless_users@2rosenthals.com> wrote:

>  Hello
>
> As an old time OS/2 eComStation user, now having to use Windoze for work
> reasons, I would like to try to re-engage with the OS that i got to know and
> respect -- Os/2 .
> I have a US Robotics wireless router and would like to know if there are
> eComStation drivers for this router.... or is there a way to set this router
> up under eComStation?
>
> Or do I need a new eComstaion-compatible router?
>
> And if so which one do I buy (in England)?
>
>
> Peter Knibbs
>
> England
>
>
> -----Original Message-----
> From: chekmarx [mailto:os2-wireless_users@2rosenthals.com<os2-wireless_users@2rosenthals.com>
> ]
> Sent: Thu 25-Mar-10 8:58 PM
> To: OS/2 Wireless Users Mailing List
> Subject: Re: [OS2Wireless] Wireless router
>
> Hi Mike,
>
> No can do on getting a UPS as my living space is just too small as it is.
> My apartment is basically three rooms - a large kitchen, a full bathroom,
> and a large living/bed room.  Which houses my bed, a triple-dresser (with
> only a tiny closet I have to keep all seasonal clothing in the dresser), a
> 19" flat-screen CRT television with digital cable box and DVD player, my
> computer desk and chair, a Mesa-Boogie Studio Caliber guitar amplifier, two
> electric guitars on wall hangers, my newly bought Ibanez electric-acoustic
> in a floor stand, a small Traynor practice amp, my large DigiTech
> guitar-modeler hardware, assorted effects petals and guitar cables, a
> nightstand, and finally a wooden floor stand just large enough to hold my
> Brother color laser printer.  Whew!  I'm exhausted just writing it all out
> ...
>
> So as you can see, if I can avoid adding any more *physical* items that
> would take up floor space the better off I am ...
>
> I bought my guitar-modeler (a DigiTech GNX3000 for full digital recording
> and modeling of assorted vintage and new amps along with a slew of digital
> guitar effects) without taking into consideration the space needed for
> hooking it up to my newly purchased Gene Alexander computer.  As it stands
> three-months later, I have to figure out the placement of the gear, as I
> need to run the DigiTech through the Mesa-Boogie amp's effects loop, then
> into my computer, also allowing for plugging in my guitar (which obviously
> I
> have to allow for the length of a full size Les-Paul guitar) into the
> modeler.  So basically I need to wait for those times when my back and knee
> problems allow for me to get down on the floor with a tape-measure and
> layout all the recording and computer gear.  CAD is great for playing
> around
> with various configurations, but the dimensions of everything has to 100%
> accurate!  So I have my work cut out for me.  Plus, just writing this up I
> realized I need to also allow for a stool for sitting when playing and
> recording since my computer chair is unusable for sitting and playing a
> guitar!
>
> Yikes!
>
> Greg
>
>
> On Thu, Mar 25, 2010 at 3:46 PM, Mike O'Connor <
> os2-wireless_users@2rosenthals.com> wrote:
>
> > chekmarx wrote:
> >
> >> On Thu, Mar 25, 2010 at 2:47 PM, Will Honea <
> >> os2-wireless_users@2rosenthals.com <mailto:
>
> >> os2-wireless_users@2rosenthals.com>> wrote:
> >>
> >> <snip>
> >>
> >>    Just a thought for
> >>    you:  those puny surge protector strips are very limited but
> >>    (especially for
> >>    phone lines) one at the point of entry cascaded with a second one
> >>    several feet
> >>    away near the actual equipment reduces the surge MUCH better than
> >>    a single
> >>    point protection scheme.
> >>
> >>
> >> Thanks Will for the info.  I knew that the POS strips didn't do much to
> >> protect electronic gear but I didn't know a two-strip approach would be
> a
> >> better route to go.  I need to get some sort of protection for my new
> >> system.  I was hoping to get something that would simply plug into a
> >> two-gang receptacle, replacing the face-plate.
> >>
> >> Would you happen to have any suggestions for a quality piece?
> >> (Basically money is no longer an issue.   I bought my system from Gene
> >> Alexander of EERAC Computers and want it to be protected!)
> >>
> >> TIA
> >> Greg
> >>
> >>    --
> >>    Will Honea <whonea@whonea.net <mailto:whonea@whonea.net>
> >>
> >>
> >>
> >>  Hi Greg,
> >
> > Get yourself a UPS!
> >
> > Regards,
> > Mike
> >
> > --
> > Failed the exam for
> > --------------------
> > MCSE - Minesweeper Consultant and Solitaire Expert
> > --------------------
> > Personal replies to any of : mikeoc (at) internode (dot) on (dot) net
> > mikeoc (at) austarnet (dot) com (dot) au
> > majilok (at) gmail (dot) com
> > [Please ZIP any attachments, other than GIF/JPG or plain-text]
> > If you are missing a response from me - check Tweed Heads WX status at:
> > http://www.bom.gov.au/products/IDR663.loop.shtml#skip
> >
> >
> >
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> > This message is sent to you because you are subscribed to
> >  the mailing list <os2-wireless_users@2rosenthals.com>.
> > To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
> > To switch to the DIGEST mode, E-mail to <
> > os2-wireless_users-digest@2rosenthals.com>
> > To switch to the INDEX mode, E-mail to <
> > os2-wireless_users-index@2rosenthals.com>
> > Send administrative queries to  <
> > os2-wireless_users-request@2rosenthals.com>
> > To subscribe (new addresses), E-mail to: <
> > os2-wireless_users-on@2rosenthals.com> and reply to the confirmation
> > email.
> > Web archives are publicly available at: http://lists.2rosenthals.com
> >
> > This list is hosted by Rosenthal & Rosenthal, LLC
> > P.O. Box 281, Deer Park, NY 11729-0281. Non-
> > electronic communications related to content
> > contained in these messages should be directed
> > to the above address. (CAN-SPAM Act of 2003)
> >
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> >
> >
>
>
> --
>
> "Our Freedom is supported by five boxes: Soap, Ballot, Jury, Witness, and
> if
> all else fails, Ammo."
>
>


--
"Our Freedom is supported by five boxes: Soap, Ballot, Jury, Witness, and if
all else fails, Ammo."


Naro?iti: Poro?ilo (Feed), Izvle?ek (Digest), Indeks.
Odjava
E-pošta za mojstra za sezname