Mailing List os2-wireless_users@2rosenthals.com Archived Message #6734

From: "KNIBBS P.M." <os2-wireless_users@2rosenthals.com> Full Headers
Undecoded message
Subject: RE: [OS2Wireless] Wireless router
Date: Fri, 26 Mar 2010 15:13:18 -0000
To: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

RE: [OS2Wireless] Wireless router

OK thanks.

I've just tried to install the Genmac drivers and the only mod to the config.sys is:

RUN=D:\genmac\DRIVER\HELPERW.EXE

There are no other entries for *.nif or *.sys files and no alteration to the path statement....is this correct?

There is a folder on the desktop which contains only help, a web page, a scan tool (which doesn't find the Wifi device) and an empty log file.

The installation program detected my WLAN as "Atheros 168c:1014".
I've run both the "full" and "split" Genmac installations for the LAN cards detected but on reboot my Wifi warning light is dead/off.


any ideas to fix?

Thanks

Peter


-----Original Message-----
From: Sam Lewis [mailto:os2-wireless_users@2rosenthals.com]
Sent: Fri 26-Mar-10 12:34 PM
To: OS/2 Wireless Users Mailing List
Subject: Re: [OS2Wireless] Wireless router



Sent from my iPhone

On Mar 26, 2010, at 5:23 AM, "KNIBBS P.M." <os2-wireless_users@2rosenthals.com
 > wrote:

> Sorry I'm a little rusty /stupid.
>
> The last time I used eCS was before I went wireless and as far as I 
> can remember the version of eCS I have (1.1 I think) didn't 
> recognise the wireless card on my ThinkPad x31.
>
> Yep so it's nothing to do with the router...I asked the wrong 
> question.
>
> What I really need to know is how can I set up eCS to recognise the 
> wireless card on my thinkPad
>
>
If you know which wifi chipset you have go to netlabs and download the 
genmac package for it.
> ....and from where can I get an up to date browser? The one I 
> have.... Mozilla... is very old and flash etc doesn't work...
>
>
I believe we are up to firefox 3.5.9, also available on netlabs.
Sam
> Cheers
>
> Peter Knibbs
> England
>
>
> -----Original Message-----
> From: chekmarx [mailto:os2-wireless_users@2rosenthals.com]
> Sent: Thu 25-Mar-10 9:37 PM
> To: OS/2 Wireless Users Mailing List
> Subject: Re: [OS2Wireless] Wireless router
>
> You should be able to configure the router via a web-browser.  The 
> necessary
> IP should be in the docs that came with the router, or simply use 
> google to
> find it.  I can't remember what the IP for mine is off the top of my 
> head
> since it has been years since I needed to make any changes, but many
> different brands of routers use the same IP to access the built-in
> configuration HTML page.
>
> Basically, no drivers are required!
>
> On Thu, Mar 25, 2010 at 5:32 PM, KNIBBS P.M. <
> os2-wireless_users@2rosenthals.com> wrote:
>
> >  Hello
> >
> > As an old time OS/2 eComStation user, now having to use Windoze 
> for work
> > reasons, I would like to try to re-engage with the OS that i got 
> to know and
> > respect -- Os/2 .
> > I have a US Robotics wireless router and would like to know if 
> there are
> > eComStation drivers for this router.... or is there a way to set 
> this router
> > up under eComStation?
> >
> > Or do I need a new eComstaion-compatible router?
> >
> > And if so which one do I buy (in England)?
> >
> >
> > Peter Knibbs
> >
> > England
> >
> >
> > -----Original Message-----
> > From: chekmarx [mailto:os2-wireless_users@2rosenthals.com<os2-wireless_users@2rosenthals.com
> >
> > ]
> > Sent: Thu 25-Mar-10 8:58 PM
> > To: OS/2 Wireless Users Mailing List
> > Subject: Re: [OS2Wireless] Wireless router
> >
> > Hi Mike,
> >
> > No can do on getting a UPS as my living space is just too small as 
> it is.
> > My apartment is basically three rooms - a large kitchen, a full 
> bathroom,
> > and a large living/bed room.  Which houses my bed, a triple-
> dresser (with
> > only a tiny closet I have to keep all seasonal clothing in the 
> dresser), a
> > 19" flat-screen CRT television with digital cable box and DVD 
> player, my
> > computer desk and chair, a Mesa-Boogie Studio Caliber guitar 
> amplifier, two
> > electric guitars on wall hangers, my newly bought Ibanez electric-
> acoustic
> > in a floor stand, a small Traynor practice amp, my large DigiTech
> > guitar-modeler hardware, assorted effects petals and guitar 
> cables, a
> > nightstand, and finally a wooden floor stand just large enough to 
> hold my
> > Brother color laser printer.  Whew!  I'm exhausted just writing it 
> all out
> > ...
> >
> > So as you can see, if I can avoid adding any more *physical* items 
> that
> > would take up floor space the better off I am ...
> >
> > I bought my guitar-modeler (a DigiTech GNX3000 for full digital 
> recording
> > and modeling of assorted vintage and new amps along with a slew of 
> digital
> > guitar effects) without taking into consideration the space needed 
> for
> > hooking it up to my newly purchased Gene Alexander computer.  As 
> it stands
> > three-months later, I have to figure out the placement of the 
> gear, as I
> > need to run the DigiTech through the Mesa-Boogie amp's effects 
> loop, then
> > into my computer, also allowing for plugging in my guitar (which 
> obviously
> > I
> > have to allow for the length of a full size Les-Paul guitar) into 
> the
> > modeler.  So basically I need to wait for those times when my back 
> and knee
> > problems allow for me to get down on the floor with a tape-measure 
> and
> > layout all the recording and computer gear.  CAD is great for 
> playing
> > around
> > with various configurations, but the dimensions of everything has 
> to 100%
> > accurate!  So I have my work cut out for me.  Plus, just writing 
> this up I
> > realized I need to also allow for a stool for sitting when playing 
> and
> > recording since my computer chair is unusable for sitting and 
> playing a
> > guitar!
> >
> > Yikes!
> >
> > Greg
> >
> >
> > On Thu, Mar 25, 2010 at 3:46 PM, Mike O'Connor <
> > os2-wireless_users@2rosenthals.com> wrote:
> >
> > > chekmarx wrote:
> > >
> > >> On Thu, Mar 25, 2010 at 2:47 PM, Will Honea <
> > >> os2-wireless_users@2rosenthals.com <mailto:
> >
> > >> os2-wireless_users@2rosenthals.com>> wrote:
> > >>
> > >> <snip>
> > >>
> > >>    Just a thought for
> > >>    you:  those puny surge protector strips are very limited but
> > >>    (especially for
> > >>    phone lines) one at the point of entry cascaded with a 
> second one
> > >>    several feet
> > >>    away near the actual equipment reduces the surge MUCH better 
> than
> > >>    a single
> > >>    point protection scheme.
> > >>
> > >>
> > >> Thanks Will for the info.  I knew that the POS strips didn't do 
> much to
> > >> protect electronic gear but I didn't know a two-strip approach 
> would be
> > a
> > >> better route to go.  I need to get some sort of protection for 
> my new
> > >> system.  I was hoping to get something that would simply plug 
> into a
> > >> two-gang receptacle, replacing the face-plate.
> > >>
> > >> Would you happen to have any suggestions for a quality piece?
> > >> (Basically money is no longer an issue.   I bought my system 
> from Gene
> > >> Alexander of EERAC Computers and want it to be protected!)
> > >>
> > >> TIA
> > >> Greg
> > >>
> > >>    --
> > >>    Will Honea <whonea@whonea.net <mailto:whonea@whonea.net>
> > >>
> > >>
> > >>
> > >>  Hi Greg,
> > >
> > > Get yourself a UPS!
> > >
> > > Regards,
> > > Mike
> > >
> > > --
> > > Failed the exam for
> > > --------------------
> > > MCSE - Minesweeper Consultant and Solitaire Expert
> > > --------------------
> > > Personal replies to any of : mikeoc (at) internode (dot) on 
> (dot) net
> > > mikeoc (at) austarnet (dot) com (dot) au
> > > majilok (at) gmail (dot) com
> > > [Please ZIP any attachments, other than GIF/JPG or plain-text]
> > > If you are missing a response from me - check Tweed Heads WX 
> status at:
> > > http://www.bom.gov.au/products/IDR663.loop.shtml#skip
> > >
> > >
> > >
> > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> > > This message is sent to you because you are subscribed to
> > >  the mailing list <os2-wireless_users@2rosenthals.com>.
> > > To unsubscribe, E-mail to: <os2-wireless_users-
> off@2rosenthals.com>
> > > To switch to the DIGEST mode, E-mail to <
> > > os2-wireless_users-digest@2rosenthals.com>
> > > To switch to the INDEX mode, E-mail to <
> > > os2-wireless_users-index@2rosenthals.com>
> > > Send administrative queries to  <
> > > os2-wireless_users-request@2rosenthals.com>
> > > To subscribe (new addresses), E-mail to: <
> > > os2-wireless_users-on@2rosenthals.com> and reply to the 
> confirmation
> > > email.
> > > Web archives are publicly available at: http://lists.2rosenthals.com
> > >
> > > This list is hosted by Rosenthal & Rosenthal, LLC
> > > P.O. Box 281, Deer Park, NY 11729-0281. Non-
> > > electronic communications related to content
> > > contained in these messages should be directed
> > > to the above address. (CAN-SPAM Act of 2003)
> > >
> > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> > >
> > >
> >
> >
> > --
> >
> > "Our Freedom is supported by five boxes: Soap, Ballot, Jury, 
> Witness, and
> > if
> > all else fails, Ammo."
> >
> >
>
>
> --
> "Our Freedom is supported by five boxes: Soap, Ballot, Jury, 
> Witness, and if
> all else fails, Ammo."
>


Subscribe: Feed, Digest, Index.
Unsubscribe
Mail to ListMaster