Both the eCS and the Win computer use 10.20.30.1 as the DNS, i.e., the
Netgear router, which is also the default gateway. Trace route on both
machines take me to first the Netgear router, than the Westell modem,
after that the OS/2 application returns only '*' for each hop and
eventually ends at 30 hops. The Win machine needs 11 hops to get to
salesforce.com.
On Thu, 15 Apr 2010 07:31:40 -0400, Leon D. Zetekoff wrote:
>On 4/15/2010 6:55 AM, Dave Saville wrote:
>> On Thu, 15 Apr 2010 05:53:30 -0400 Leon D. Zetekoff wrote:
>>
>> <snip>
>>
>>
>>> Didnt I say something like this? I work with routers and firewalls every
>>> day. He needs to see what ip info he's being configured with. Please run
>>> the tests I mentioned last night.
>>>
>>> also, note that some routers will not respond to pings/traces and this
>>> is normal. But in your case you're being sent someplace wrong. Again
>>> that seems to indicate default route. also check your routing table and
>>> see what's in there.
>>>
>>> What I would do is connect eCS directky to the DSL device and if it
>>> works there then the problem is in your netgear.
>>>
>> But is not the point that windows through the *same* kit has no
>> trouble? But in any case I am very suspicious of Netgear routers and
>> DNS. I would either run Bind locally or hard code external DNS servers
>> on all boxes. I have seen them stop serving wired connection requests
>> as soon as a wifi client gets connected.
>>
>that's why I asked for what I did. It is very possible ecs is getting
>the DHCP info differently than windoze.
>I'm not a fan of netgear. Linksys as well has issues as well.
>
>leon
--
This email was Anti Virus checked by Astaro Security Gateway. http://www.astaro.com
Nazaj na seznam