From: "Jan van Wijk" Received: from [192.168.100.201] (account jvw@hautspot.com HELO merlin) by 2rosenthals.com (CommuniGate Pro SMTP 5.1.3) with ESMTPA id 1581464 for os2-wireless_users@2rosenthals.com; Sun, 06 Jan 2008 06:57:01 -0500 To: "OS/2 Wireless Users Mailing List" Date: Sun, 06 Jan 2008 12:50:54 +0100 Reply-To: "Jan van Wijk" Priority: Normal X-Mailer: PMMail 2.20.2382 for OS/2 Warp 4.5 In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: [OS2Wireless] Problems connecting using PEER on T60p, Intel 3945abg Message-ID: Hi Frank, On Sun, 06 Jan 2008 11:04:17 +0100 (CET), Frank Vos wrote: >I have Peer working on my R60, this laptop has the same WIFI chipset. >I can connect to my desktop PC with eCS and windows and to my NAS with Samba. OK, good th hear! Now to the WHY :-) >>Looks like some IBMLAN problem to me. Yes, that is the most likely issue. I was thinking about password encryption or so, but the thing is that basically the same setup works fine with the T42p. And, when using the SAMBA access (evfs.ifs) you specify all of that in the dialog anyway ... >>Could there be conflicts with the SAMBA client and PEER ? >>This 'EVFS.IFS' is installed (and does not connect either) >Maybe?? Well, I commented out the evfs.ifs, and that did not make a difference ... >I'm going to sent you my ini files. Maybe you find something >that's different. OK, thanks a lot, that may help. One other thing I will try is install a second eCS RC4 using only the (native) driver for the wired interface, and see if that CAN connect. In my initial install I had two NIC's configured, both GenMac and I tried to use both. Both worked with TCP/IP and both failed with SMB ... TIA, JvW ========================================================================= DFSee Home: http://www.dfsee.com; Jan van Wijk; Author of DFSee - info@dfsee.com