Poštni seznam arhiviranih sporo?il

Nazaj na seznam

Od: "Chris Hodgkins" <os2-wireless_users@2rosenthals.com> Glava Izvorno E-sporo?ilo Zadeva: Re: [OS2Wireless]Re: Wireless LAN Mon3, Genmac 2 and Injoy Firewalls wrapper, xWlan detecting wrong lan Datum: Mon, 19 Feb 2007 03:46:48 +0000 Za: OS/2 Wireless Users Mailing List <os2-wireless_users@2rosenthals.com>

Lewis G Rosenthal wrote:

Thanks Lewis, and everyone who replied.


I tried bumping Injoy in the MPTS Transport services app to a higher
logical adapter number, but as yet have not managed to get it working.


As requested:

dimtest.exe reports:

Wireless LAN Monitor DIM Test executable - Netlabs WLan Project 2003-2006

- initializing WLan driver access ... Ok.
- querying number of available WLan drivers ... Ok.
- querying information of available WLan drivers ... Ok.

  DIM Module: D:\WPS\XWORKPLACE\PLUGINS\XCENTER\XWLAN\GENMAC.DIM
 Driver Name: WRND32$
Driver Title: GenMac Wrapper Intel 2915 a/b/g [8086:4224]
IP interface: lan2

- termination WLan driver access ... Ok.



but Wireless Lan Mon widget shows IP interface is disabled: lan2


Protocol.ini looks like this:

[PROT_MAN]

   DRIVERNAME = PROTMAN$

[IBMLXCFG]

   netbeui_nif = netbeui.nif
   tcpip_nif = tcpip.nif
   FXWRAP_nif = fxwrap.nif
   W8086X4224_nif = W8086X4224.nif
   B57_nif = B57.nif

[NETBIOS]

   DriverName = netbios$
   ADAPTER0 = netbeui$,0
   ADAPTER1 = netbeui$,1

[netbeui_nif]

   DriverName = netbeui$
   Bindings   = B57_nif,FXWRAP_nif
   ETHERAND_TYPE = "I"
   USEADDRREV = "YES"
   OS2TRACEMASK = 0x0
   SESSIONS = 130
   NCBS = 225
   NAMES = 21
   SELECTORS = 50
   USEMAXDATAGRAM = "NO"
   ADAPTRATE = 1000
   WINDOWERRORS = 0
   MAXDATARCV = 4168
   TI = 30000
   T1 = 1000
   T2 = 200
   MAXIN = 1
   MAXOUT = 1
   NETBIOSTIMEOUT = 500
   NETBIOSRETRIES = 3
   NAMECACHE = 1000
   RNDOPTION = 1
   PIGGYBACKACKS = 1
   DATAGRAMPACKETS = 50
   PACKETS = 300
   LOOPPACKETS = 8
   PIPELINE = 5
   MAXTRANSMITS = 6
   MINTRANSMITS = 2
   DLCRETRIES = 10
   FCPRIORITY = 5
   NETFLAGS = 0x0

[tcpip_nif]

   DriverName = TCPIP$
   Bindings   = B57_nif,FXWRAP_nif

[W8086X4224_nif]

   DriverName = WRND32$
   VENDOR = 0x8086
   DEVICE = 0x4224
   NDIS_SYS = "W29N51.SYS"
   NDIS_INF = "W29N51.INF"
   SSID = "WLAN"
   DEBUGLEVEL = "NO"
   OPTIONS = "NOTIMER"

[B57_nif]

   DriverName = B57$

[FXWRAP_nif]

   Drivername = FXWRAP1$
   Bindings   = W8086X4224_nif


cheers

Chris




> On 02/13/07 01:22 am, Chris Hodgkins thus wrote :
>
>> Hi Gents,
>>
>> Is there anyway in XWorkplace Wireless LAN Mon3 widget to tell it which
>> lan interface to use?
>>
>> I have a T43 that's taking over from a T20 thinkpad laptop, it's been
>> working just fine using Genmac2 and XWLan3 and the Intel 8086:4224 Wifi
>> chipset, but every time I try to use the Injoy Firewall product and its
>> .nif wrapper driver the Wireless LAN widget tries to setup lan2, and as
>> there isn't a lan2 network adapter this fails.
>>
>> Or is this a similar problem to when we have the Innotek VPC/2 driver
>> installed, and Genmac not working with wrapper drivers that need
>> promiscious mode.
>>
>>
>>  
>
> Hi, Chris (nice to settle into another on-topic discussion). I'm not
> familiar with InJoy per se. Have you tried bumping InJoy to a higher
> adapter number? My assumption is that InJoy is configuring its own
> virtual adapter in there somewhere, and this is what is confusing XWLAN.
> Currently, AFAIK, there is no way to override XWLAN's detection of
> GenMAC's adapter number (as there was previously). Perhaps this is an
> issue which is already known to Christian, but knowing him as I do, he
> would have mentioned it in the docs, and I can find no such entry in the
> docs.
>
> Go to your PLUGINS\xwlan directory and open a command prompt. Run
> dimtest.exe from there, and please post your results.
>
> Also, for the heck of it, would you mind posting your PROTOCOL.INI?
>

Naro?iti: Poro?ilo (Feed), Izvle?ek (Digest), Indeks. Odjava E-pošta za mojstra za sezname