os2-wireless_users@2rosenthals.com Messaggio archiviato #824 messaggio precedente messaggio successivo torna alla lista

Da: "Jan van Wijk" <os2-wireless_users@2rosenthals.com> Intestazioni complete
Messaggio non codificato
Oggetto: Re: [OS2Wireless]No valid Hardware Message on T43 with 2200
Data: Sun, 25 Feb 2007 18:52:16 +0100 (CET)
A: "OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com>

Hi Eric,

On Sun, 25 Feb 2007 11:33:51 -0600 (CST), Eric A. Erickson wrote:

>I had to rebuild my T43 and now after installing eCS Beta 3 I get the
>following error during boot.
>
>No valid hardware info in protocol.ini for ("WRNDS32$ ")

Known problem, I had the same, you are most likely missing
the VENDOR and DEVICE lines missing, see below for what
it should look like (Intel 2200 on a T42p)


++++
[W8086X4220_NIF]

   DriverName = WRND32$
   VENDOR = 0x8086
   DEVICE = 0x4220
   NDIS_SYS = "W29N50.SYS"
   NDIS_INF = "w8086x4220.inf"
   SSID = "w34rfvbhu89ol"
   DEBUGLEVEL = "NONE"
   OPTIONS = "NONE"
++++


Regards, JvW


=========================================================================
DFSee Home: http://www.dfsee.com; Jan van Wijk;  Author of DFSee - info@dfsee.com
Isriviti: Feed, Riassunto, Indice.
Disiscriviti
Scrivi a ListMaster