| Da: |
"Jan van Wijk" <os2-wireless_users@2rosenthals.com> |
Intestazioni complete
Messaggio non codificato |
| Oggetto: |
Re: [OS2Wireless]No valid Hardware Message on T43 with 2200 |
| Data: |
Sun, 25 Feb 2007 18:52:16 +0100 (CET) |
| A: |
"OS/2 Wireless Users Mailing List" <os2-wireless_users@2rosenthals.com> |
|
|---|
Hi Eric,
On Sun, 25 Feb 2007 11:33:51 -0600 (CST), Eric A. Erickson wrote:
>I had to rebuild my T43 and now after installing eCS Beta 3 I get the
>following error during boot.
>
>No valid hardware info in protocol.ini for ("WRNDS32$ ")
Known problem, I had the same, you are most likely missing
the VENDOR and DEVICE lines missing, see below for what
it should look like (Intel 2200 on a T42p)
++++
[W8086X4220_NIF]
DriverName = WRND32$
VENDOR = 0x8086
DEVICE = 0x4220
NDIS_SYS = "W29N50.SYS"
NDIS_INF = "w8086x4220.inf"
SSID = "w34rfvbhu89ol"
DEBUGLEVEL = "NONE"
OPTIONS = "NONE"
++++
Regards, JvW
=========================================================================
DFSee Home: http://www.dfsee.com; Jan van Wijk; Author of DFSee - info@dfsee.com
|