|Mailing List firstname.lastname@example.org Archived Message #151||back to list|
On 2020-01-18, at 10:59:28, Massimo S. wrote:
Il 17/01/2020 18:41, Doug Bissett ha scritto:
On 2020-01-17, at 11:27:51, Massimo S. wrote:
Il 17/01/2020 03:49, Doug Bissett ha scritto:
On 2020-01-16, at 21:54:31, Massimo S. wrote:
...snip the CONFIG.SYS details...
It appears that you have defined two NICs. The ancient
PCNTND.OS2 driver is for an old 100 Mbs NIC. I suggest
network driver for the Intel 1000 Mbs NIC (the first one in the
workslinesworks well). BigIcons are also not necessary. If you don't want
those things, deselect them in the installer. Randomly REMing
in CONFIG.SYS is not the best approach.Doug, i'm in "trouble":)
i've put Intel pro 1000 but i'm not finding a single driver that
selectwithIn the VBox Network setup, select "Intel Pro/1000 MT Desktop
altready tried, but they don't work
e1000.os2, ibmgc.os2, ibmge.os2, mmigb.os2....:(
(8254OEM)". When you install ArcaOS, it will automatically
youthe Multimac MMLEM driver. That has always worked, for me. If
No. The ancient IBM drivers, and the early Multimac driversreally do need a second NIC, select the same for Adapter 2.hi,
i don't tried MMLEM since i heard somewhere that's not anymore
supported, am i right?
(E1000B, etc.) are no longer supported (they may still work,
depending on the hardware, but they have been replaced for a
reason). They were replaced by the later Multimac drivers
(MMLEM, etc. based on BSD drivers). Only the later Multimac
drivers (BSD) are supported (if you have a valid Arca Noae
software subscription). There are a few other differences.
Depending on the system capabilities, they*may* use the MSI
interrupt method (requires a recent version of ACPI), which takes
some of the load off of the interrupt hardware (which is already
being done by software, in a VM). A few other device drivers*may* use the MSI interrupt method too.
It all fits together, and trying to eliminate parts of it can cause
unexpected problems. I suggest putting it together as the Arca
Noae installer builds it, and don't change that, unless you are very
familiar with the internal operation of modern OS/2.
Mail to ListMaster